- Joined
- Sep 29, 2003
- Messages
- 251
TRADED
I purchased the Hellrazor as a user, and have stripped the blade and handle end.
I never allowed the stripper to gain access to the underside of the handle, so the original coating would not be disturbed.
Then I refinished the blade in Brownells Aluma-Hyde II (flat-dark earth), to combat rust.
It includes a kidex sheath with a small Tek-Lok.
It has had a convex edge put on it with the Barkriver Knife & Tool stropping system and it is really sharp.
For some reason I am all the sudden looking for a Busse Comb Grade Jackhammer new or user and with or without the sheath, it doesn't really matter, as long as it is not damaged.
I usually do my buying, selling & trading at ar15.com, but the busse may get more exposure here, so I thought I would try it.
If you would like you may check my feedback at ar15.com under the screen name ROUGH.
Link to feedback page: http://www.ar15.com/forums/topic.html?b=7&f=109&t=549690
You can send me an e-mail or im if you are interested.
Here you can see the original coating that I left in the handle area and the new coating
I butted up to it.
a close up of the tip
Here you can see where some of the Aluma-Hyde II got rubbed off from the sheath.
thanks for looking.
You must be 18 years old or older to do this trade.
local laws and regulations are your responsability.
I purchased the Hellrazor as a user, and have stripped the blade and handle end.
I never allowed the stripper to gain access to the underside of the handle, so the original coating would not be disturbed.
Then I refinished the blade in Brownells Aluma-Hyde II (flat-dark earth), to combat rust.
It includes a kidex sheath with a small Tek-Lok.
It has had a convex edge put on it with the Barkriver Knife & Tool stropping system and it is really sharp.
For some reason I am all the sudden looking for a Busse Comb Grade Jackhammer new or user and with or without the sheath, it doesn't really matter, as long as it is not damaged.
I usually do my buying, selling & trading at ar15.com, but the busse may get more exposure here, so I thought I would try it.
If you would like you may check my feedback at ar15.com under the screen name ROUGH.
Link to feedback page: http://www.ar15.com/forums/topic.html?b=7&f=109&t=549690
You can send me an e-mail or im if you are interested.
Here you can see the original coating that I left in the handle area and the new coating
I butted up to it.
a close up of the tip
Here you can see where some of the Aluma-Hyde II got rubbed off from the sheath.
thanks for looking.
You must be 18 years old or older to do this trade.
local laws and regulations are your responsability.
Last edited:
