Prices are net to me including shipping to the US - i.e. you cover PP fees, or send PP gift, MO or check. First to post I'll take it, gets it. Follow up with an email for payment details. Not looking for trades at present.
Discounts available for multiple purchases reflecting the lower shipping costs (I have other custom and production fixed blades for sale and will shortly post some folders).
Sorry the pictures aren't great - indoors and too much flash. Really hard to let these go, but been a recent change in life priorities, so I have to be ruthless about getting rid of unused steel.
Adam Vigil tanto. 8" s35vn blade, black rayskin and iato wrap handle. Hammered brass guard and menuki. $275. This is the knife that Adam uses for his avatar on BF.
Richard Mok (RMoK) 12" bowie in s35vn with buckeye burl handle slabs. Made from thick steel stock (probably around 0.35") and convex ground. No sheath. This knife is featured on Richard's Facebook page, so you can assume he was proud of it. $275
Phil Tham bowie. Amboynia burl handle with blued damascus guard. 11" W2 blade with pronounced hamon (not really visible in this picture). $275. No sheath. SOLD
Big Chris Knives 5" reverse tanto slicer. Thin (but stiff) and convex ground s90v blade, camo G10 handle. $200 SOLD
Huge forged Joe Carlton chopper in 5160. This has a 14" blade and a hand-and-a-half handle (21" in total). The blade is about 0.22" at the widest, and is quite nimble for the size. If you want a real chopper, this is it. I'm including a 3", D2, hollow ground knife with tapered tang by Zander Knives, which I think complements the chopper well. $260 for the set. SOLD
Joshua Gallardo AEBL gentleman's fixed blade. Handle is oak burl and green micarta, with a multicolored micarta spacer and black and white liners. Cutting edge length 3"; total length 7". $160
Gravelle Knives BIC. 5" 3V blade from around 0.20" stock. Black canvas micarta handle. A compact powerhouse with a lot of versatility. $200.
Adam Kornalski (Jamall) Knives Kryton. 170mm blade in 7mm thick A8Mod steel. This steel has been likened to INFI. Black G10 handle. $180. SOLD
Herman knives Elmax slicer. 4" blade, 4.75" handle, sculpted orange G10 scales, titanium liners and clip, black G10 backspacer. A nice slicey knife and very compact for the blade length, but the dropped point at the tip means its not delicate. Great price on a custom folder from a talented maker. $255 SOLD
GL Drew 52100 double edged fighter. Maple burl handle and iron guard. Traditional / rustic feel. $150. SOLD
Daniel Koster 3V Bushmaster with custom Al Welke sheath. I love the ample handle on this knife, but the fact that the tang is skeletonized, so that it is still very well balanced. Very versatile 5" blade with 4.5" cutting edge. $180
Tkrocky Bushcrafter. Tan micarta and spalted maple handle with thick blue liners. Kydex sheath. $160.
Here's the original sales post for better pictures - http://www.bladeforums.com/forums/showthread.php/1394631-Cpm-3v-bushcrafter
Trocky 4.5" 3V sheepsfoot, with tapered tang. $160
Discounts available for multiple purchases reflecting the lower shipping costs (I have other custom and production fixed blades for sale and will shortly post some folders).
Sorry the pictures aren't great - indoors and too much flash. Really hard to let these go, but been a recent change in life priorities, so I have to be ruthless about getting rid of unused steel.
Adam Vigil tanto. 8" s35vn blade, black rayskin and iato wrap handle. Hammered brass guard and menuki. $275. This is the knife that Adam uses for his avatar on BF.
Richard Mok (RMoK) 12" bowie in s35vn with buckeye burl handle slabs. Made from thick steel stock (probably around 0.35") and convex ground. No sheath. This knife is featured on Richard's Facebook page, so you can assume he was proud of it. $275
Phil Tham bowie. Amboynia burl handle with blued damascus guard. 11" W2 blade with pronounced hamon (not really visible in this picture). $275. No sheath. SOLD
Big Chris Knives 5" reverse tanto slicer. Thin (but stiff) and convex ground s90v blade, camo G10 handle. $200 SOLD
Huge forged Joe Carlton chopper in 5160. This has a 14" blade and a hand-and-a-half handle (21" in total). The blade is about 0.22" at the widest, and is quite nimble for the size. If you want a real chopper, this is it. I'm including a 3", D2, hollow ground knife with tapered tang by Zander Knives, which I think complements the chopper well. $260 for the set. SOLD
Joshua Gallardo AEBL gentleman's fixed blade. Handle is oak burl and green micarta, with a multicolored micarta spacer and black and white liners. Cutting edge length 3"; total length 7". $160
Gravelle Knives BIC. 5" 3V blade from around 0.20" stock. Black canvas micarta handle. A compact powerhouse with a lot of versatility. $200.
Adam Kornalski (Jamall) Knives Kryton. 170mm blade in 7mm thick A8Mod steel. This steel has been likened to INFI. Black G10 handle. $180. SOLD
Herman knives Elmax slicer. 4" blade, 4.75" handle, sculpted orange G10 scales, titanium liners and clip, black G10 backspacer. A nice slicey knife and very compact for the blade length, but the dropped point at the tip means its not delicate. Great price on a custom folder from a talented maker. $255 SOLD
GL Drew 52100 double edged fighter. Maple burl handle and iron guard. Traditional / rustic feel. $150. SOLD
Daniel Koster 3V Bushmaster with custom Al Welke sheath. I love the ample handle on this knife, but the fact that the tang is skeletonized, so that it is still very well balanced. Very versatile 5" blade with 4.5" cutting edge. $180
Tkrocky Bushcrafter. Tan micarta and spalted maple handle with thick blue liners. Kydex sheath. $160.
Here's the original sales post for better pictures - http://www.bladeforums.com/forums/showthread.php/1394631-Cpm-3v-bushcrafter
Trocky 4.5" 3V sheepsfoot, with tapered tang. $160
Last edited:
