- Joined
- Oct 13, 1999
- Messages
- 1,732
Earlier today I took my 12" AK out to the woodpile beside my house for a little testing. I first chopped a thin (about 2.5"), fairly seasoned branch in half. This AK ain't no 22" GRS, but it did pretty well. Until now, I never had any experience chopping with a knife this small, but I'd hazard a guess that for its size, the AK did well due to it being blade heavy. After chopping through the branch, I decided to try stripping some of the bark from it. This is where the khuk began to shine. Starting at the recurved section and using a draw cut motion, I managed to take off most of the bark within a few minutes. The 12 incher was very easy to control during this task while a larger khuk might have been more awkward and tiring. This khuk would come in handy for gathering bark and wood strips for fire tinder.
After testing the edge was still pretty sharp, so I just steeled it some with the chakma.
I also managed to get the karda out (the two knives were in the wrong holes, so that probably contributed to the situation). The k & c now fit tightly but snugly.
Bob
After testing the edge was still pretty sharp, so I just steeled it some with the chakma.
I also managed to get the karda out (the two knives were in the wrong holes, so that probably contributed to the situation). The k & c now fit tightly but snugly.
Bob