I have two Tuff Writer pens for sale today; they are being sold as is and do not include the factory packaging tubes. They are available for sale separately (priced as indicated below) or as a pair for $80. I am not interested in any trades at this time for them, and they will only be shipping to CONUS. They must be paid for via Paypal goods, and the prices include shipping/Paypal fee costs. Please send a PM on here if interested.
1) Tuff Writer Operator (Red)- $60
This has been carried by my wife in her purse and shows no sign or use or wear. It is the model that allows the cap to be posted on the rear of the pen. It has the following specs:
Length: 6.0 in
Thickness: 0.625 in
Weight: 1.6 oz.
Material: 6061-T6 aerospace grade aluminum
Clip: Cold Pressed Spring Steel w/Textured Powder Coat Finish
Clip Fittings: Black oxide stainless steel bolts and chemical welding
Finish: Non-reflective/non-marking surface treatment hard anodized to Mil-A-8625 F specifications
Cartridge: Fisher #SPR4
2) Tuff Writer Frontline Shorty Midnight Edition (Gen 1)- $30
This has been carried while I was in law enforcement as well as in an EDC role, and it shows a decent amount of wear because of this. The anodizing is worn in various areas around the clip, pen tip (when opened), lanyard hole and grip knurling. The torx screws holding the clip on are slightly loose (I have previously tightened them but it is not currently an issue where the clip is going to fall off so I have not done so lately). I have also beaten the pointed end of the pen while using it for various purposes, including an ice pick and a punch tool. All of that being said, it shows no sign of giving out and wears its scars with pride. If you're willing to sacrifice some appearance for utility, you will be paying a significantly reduced price for a pen that will last a lifetime. It is the model that does not allow the cap to be posted on the pen body while in use, which is why I'm giving it up to try out a Maxmadco bolt-action pen. It has the following specs:
Lengths: 5.75 inches
Thickness: 0.5 Inches
Weight: 1.6 oz.
Material: 6061-T6 Aerospace Grade Aluminum
Clip: Cold Pressed Spring Steel with non-reflective textured powder-coated finish
Finish: Proprietary non-reflective / non-marking surface treatment and hard anodized to Mil-A-8625 F specifications
Cartridge: Fisher #SPR4
1) Tuff Writer Operator (Red)- $60
This has been carried by my wife in her purse and shows no sign or use or wear. It is the model that allows the cap to be posted on the rear of the pen. It has the following specs:
Length: 6.0 in
Thickness: 0.625 in
Weight: 1.6 oz.
Material: 6061-T6 aerospace grade aluminum
Clip: Cold Pressed Spring Steel w/Textured Powder Coat Finish
Clip Fittings: Black oxide stainless steel bolts and chemical welding
Finish: Non-reflective/non-marking surface treatment hard anodized to Mil-A-8625 F specifications
Cartridge: Fisher #SPR4
2) Tuff Writer Frontline Shorty Midnight Edition (Gen 1)- $30
This has been carried while I was in law enforcement as well as in an EDC role, and it shows a decent amount of wear because of this. The anodizing is worn in various areas around the clip, pen tip (when opened), lanyard hole and grip knurling. The torx screws holding the clip on are slightly loose (I have previously tightened them but it is not currently an issue where the clip is going to fall off so I have not done so lately). I have also beaten the pointed end of the pen while using it for various purposes, including an ice pick and a punch tool. All of that being said, it shows no sign of giving out and wears its scars with pride. If you're willing to sacrifice some appearance for utility, you will be paying a significantly reduced price for a pen that will last a lifetime. It is the model that does not allow the cap to be posted on the pen body while in use, which is why I'm giving it up to try out a Maxmadco bolt-action pen. It has the following specs:
Lengths: 5.75 inches
Thickness: 0.5 Inches
Weight: 1.6 oz.
Material: 6061-T6 Aerospace Grade Aluminum
Clip: Cold Pressed Spring Steel with non-reflective textured powder-coated finish
Finish: Proprietary non-reflective / non-marking surface treatment and hard anodized to Mil-A-8625 F specifications
Cartridge: Fisher #SPR4
Attachments
Last edited: