ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
If you have any questions about what's here, let me know and I'll do my best to help you out. For more details, specs, or pictures, just ask and I'll get back to you as soon as I can. I don't get notifications for profile messages so PMs or shooting me an email at kenleung1995 at hotmail dot com is the best way to reach me. I also check my threads every once in a while so I'll usually see your posts. I can work with you on the price for some of these and I'm open to trades. If you don't have much feedback or forum history, I might ask you to ship first. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. The knives will come with what's shown unless otherwise stated. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Ochs Worx Persian, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Direwares, Black Snow Sabotage, VanderMeulens, Chris Goodwyns, Rogovets, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, Skiffs, Mayos, Terzuolas, and maybe a custom Emerson or just Striders in general but I'll always be open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. TuffKnives Prospect Mini - like new - $1200
Just a perfectly built little knife with a nice blade to handle ratio. You'll be surprised that blade fits in the frame
2020 build
Stonewashed 3.25" blade in Nitro V
Blasted, bronzed, and tumbled frame with a hole pattern on the front
Satin chamfers around each of the holes
Matching milled clip and backspacer
Moonglow pivot collars
Runs glass smooth and flips effortlessly
Locks with zero play and centering is dead on
2. Crusader Forge VIS Metro MK IV - lightly carried - $700
Overbuilt tank of a knife
Blade and ti has their KG Mil-Spec coatings
Blade is just under 3.75" and is made from their proprietary CPM-DWA
Contoured, sculpted, and textured thick OD green G-10 front slab
Action is smooth and it even works as a front flipper if you get the right angle on it
Centering is dead on and lockup is good
I have lightly carried and used this one but the majority of the wear is just snail trails in the coatings
Still has the original edge and it's still sharp
Surprisingly good in hand and not as hard to carry as you might think
3. Gavko Custom Spinner - $800
Full custom 4" bladed spinner
Mike went all out hand texturing this one
It's on the frame, edges of the frame, clip, backspacer, blade flat, blade spine, edges of the flipper, inside of the backspacer, and even the inside of the blade hole
The frame is contoured and anodized green/blue and it's tumbled so you see blue flecks if you move it in the light
Good lockup
Flips great and can be spydieflicked
Centering slightly favors the front
For trades, I'm looking for: Jon Grahams, Ochs Worx Persian, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Direwares, Black Snow Sabotage, VanderMeulens, Chris Goodwyns, Rogovets, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, Skiffs, Mayos, Terzuolas, and maybe a custom Emerson or just Striders in general but I'll always be open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. TuffKnives Prospect Mini - like new - $1200
Just a perfectly built little knife with a nice blade to handle ratio. You'll be surprised that blade fits in the frame
2020 build
Stonewashed 3.25" blade in Nitro V
Blasted, bronzed, and tumbled frame with a hole pattern on the front
Satin chamfers around each of the holes
Matching milled clip and backspacer
Moonglow pivot collars
Runs glass smooth and flips effortlessly
Locks with zero play and centering is dead on
2. Crusader Forge VIS Metro MK IV - lightly carried - $700
Overbuilt tank of a knife
Blade and ti has their KG Mil-Spec coatings
Blade is just under 3.75" and is made from their proprietary CPM-DWA
Contoured, sculpted, and textured thick OD green G-10 front slab
Action is smooth and it even works as a front flipper if you get the right angle on it
Centering is dead on and lockup is good
I have lightly carried and used this one but the majority of the wear is just snail trails in the coatings
Still has the original edge and it's still sharp
Surprisingly good in hand and not as hard to carry as you might think
3. Gavko Custom Spinner - $800
Full custom 4" bladed spinner
Mike went all out hand texturing this one
It's on the frame, edges of the frame, clip, backspacer, blade flat, blade spine, edges of the flipper, inside of the backspacer, and even the inside of the blade hole
The frame is contoured and anodized green/blue and it's tumbled so you see blue flecks if you move it in the light
Good lockup
Flips great and can be spydieflicked
Centering slightly favors the front
Last edited:
