Tulip Knife Co

galvanic1882 said:
He lives in Utica but makes the knives himself, the group is on FB and he runs it. We both love old Utica Cutlery knives.
Click to expand...
Well definitely add me to the purchase list when he’s ready. Great looking blades.
 
I really like the colors the jigging and the well done crisp drawn swedge on the clip points.The fluted bolsters are a nice touch as well.

Small pocket knives are what I most enjoy carrying, but there's a lot of jacks and Barlow out there that sure are nice to look at.
 
I am a fellow custom pocket knife maker in Utica. I visited Jason's shop last month and he came over a few weeks ago with these three. I handled them up close...Very impressive. He's great guy, very humble, and working very hard.

I traded him one of my customs for some handle material, including some vintage jigged and some that blue rope jigged bone. He owes me a lesson on how to jig and dye bone and bolster shaping. Can't wait to collect on that.

As a maker, I see several super powers he has that set him apart. He was/is a die hard collector before a maker. We were looking through binder after binder of ephemera like catalogs, old ads in his 'knife room'. Yes, he has a dedicated room that will set up with display cases for the collection. His making is founded in deep understanding and research into traditional methods combined with design cues from history. One of his recent Barlows had a flattened section on the bolster where he put a Tulip etch. He showed me an old catalog picture where the idea came from.

The thought he puts into his designs is painstaking. Comparing a V1 drawing to V2, they look similar, but he explained the differences and specific motivations behind each minute change. The target pull strength, the final clocking of back spring, every line,angle, and curve is obsessed over.

He grew up in a fabrication shop so has a mindset for batch production. I'm learning a lot on just how to think about the step-by-step process flow of slip joint making and where to look for places to optimize efficiencies. So things like drawing in CAD, laser cutting, and making jigs for a specific steps are second nature. We were talking about single angle cutters for nail nicks, and he modeled in CAD the shape of two different sized nail nicks using and angled cutters with different sizes and angles.

It's great to have another maker local to encourage each other and bounce ideas back and forth.
 
Sounds amazing, and those knives are gorgeous. Hopefully I can get my hands on one someday.
 
ashwinearl said:
I am a fellow custom pocket knife maker in Utica. I visited Jason's shop last month and he came over a few weeks ago with these three. I handled them up close...Very impressive. He's great guy, very humble, and working very hard.

I traded him one of my customs for some handle material, including some vintage jigged and some that blue rope jigged bone. He owes me a lesson on how to jig and dye bone and bolster shaping. Can't wait to collect on that.

As a maker, I see several super powers he has that set him apart. He was/is a die hard collector before a maker. We were looking through binder after binder of ephemera like catalogs, old ads in his 'knife room'. Yes, he has a dedicated room that will set up with display cases for the collection. His making is founded in deep understanding and research into traditional methods combined with design cues from history. One of his recent Barlows had a flattened section on the bolster where he put a Tulip etch. He showed me an old catalog picture where the idea came from.

The thought he puts into his designs is painstaking. Comparing a V1 drawing to V2, they look similar, but he explained the differences and specific motivations behind each minute change. The target pull strength, the final clocking of back spring, every line,angle, and curve is obsessed over.

He grew up in a fabrication shop so has a mindset for batch production. I'm learning a lot on just how to think about the step-by-step process flow of slip joint making and where to look for places to optimize efficiencies. So things like drawing in CAD, laser cutting, and making jigs for a specific steps are second nature. We were talking about single angle cutters for nail nicks, and he modeled in CAD the shape of two different sized nail nicks using and angled cutters with different sizes and angles.

It's great to have another maker local to encourage each other and bounce ideas back and forth.
Click to expand...
Thanks for the insight. I’m excited to see this evolve.
 
ashwinearl said:
I am a fellow custom pocket knife maker in Utica. I visited Jason's shop last month and he came over a few weeks ago with these three. I handled them up close...Very impressive. He's great guy, very humble, and working very hard.

I traded him one of my customs for some handle material, including some vintage jigged and some that blue rope jigged bone. He owes me a lesson on how to jig and dye bone and bolster shaping. Can't wait to collect on that.

As a maker, I see several super powers he has that set him apart. He was/is a die hard collector before a maker. We were looking through binder after binder of ephemera like catalogs, old ads in his 'knife room'. Yes, he has a dedicated room that will set up with display cases for the collection. His making is founded in deep understanding and research into traditional methods combined with design cues from history. One of his recent Barlows had a flattened section on the bolster where he put a Tulip etch. He showed me an old catalog picture where the idea came from.

The thought he puts into his designs is painstaking. Comparing a V1 drawing to V2, they look similar, but he explained the differences and specific motivations behind each minute change. The target pull strength, the final clocking of back spring, every line,angle, and curve is obsessed over.

He grew up in a fabrication shop so has a mindset for batch production. I'm learning a lot on just how to think about the step-by-step process flow of slip joint making and where to look for places to optimize efficiencies. So things like drawing in CAD, laser cutting, and making jigs for a specific steps are second nature. We were talking about single angle cutters for nail nicks, and he modeled in CAD the shape of two different sized nail nicks using and angled cutters with different sizes and angles.

It's great to have another maker local to encourage each other and bounce ideas back and forth.
Click to expand...
Thanks for all the detail into his process. Very interesting and encouraging. Might there be a way to buy one of his knives if not on facebook/instagram?
 
Looking forward to getting one. His work looks unique and exceptional.
 
You must log in or register to reply here.
Back
Top