All damascus is composed of 1084 and 15n20 with the exception of the cable which is AA (basically 1084). All sizes are approximate and I usually round below the actual size. Measurements are taken at the smallest point. All prices include shipping INCONUS, PayPal (no fees), cashiers checks and money orders are the preferred method of payment.
240 layer ladder pattern. Size:15" x 1.25" x .173". $SOLD
80 layer (lazy) twist. Size: 13.5" x 1.437 x .173". $65
I also have three pieces of cable damascus:
7.5" x 1.25" x .23. $35
10.875" x 1.25" x .25". sold
This last piece has the forge scale still left on it. I thought people might like this better if you are going to forge it into a knife, this way your not paying extra for me to grind it down just to stick it back in the forge.
The size is 20.5" x 1.25" x .24" (this is the approximate thickness of the piece after it is ground down) Price is spf
I have pictures of the pieces if you want I will email them to you but since you can't see a pattern in cable damascus until after you harden it the pieces just look like a bar of steel. Here is a picture of the finished product.
These are two knife blanks from cable damascus I cut out a while ago. I already have too many projects going on and I'll never finish these so I though somebody else might finish them. They have the pin holes already drilled at 1/8" but they can be drilled bigger if you want.
The smaller one is $20 and the larger is $30 SOLD.
If you see something you want that has been sitting there for a while don't be afraid to shoot me an offer. Thanks for looking.
240 layer ladder pattern. Size:15" x 1.25" x .173". $SOLD
80 layer (lazy) twist. Size: 13.5" x 1.437 x .173". $65
I also have three pieces of cable damascus:
7.5" x 1.25" x .23. $35
10.875" x 1.25" x .25". sold
This last piece has the forge scale still left on it. I thought people might like this better if you are going to forge it into a knife, this way your not paying extra for me to grind it down just to stick it back in the forge.
The size is 20.5" x 1.25" x .24" (this is the approximate thickness of the piece after it is ground down) Price is spf
I have pictures of the pieces if you want I will email them to you but since you can't see a pattern in cable damascus until after you harden it the pieces just look like a bar of steel. Here is a picture of the finished product.
These are two knife blanks from cable damascus I cut out a while ago. I already have too many projects going on and I'll never finish these so I though somebody else might finish them. They have the pin holes already drilled at 1/8" but they can be drilled bigger if you want.
The smaller one is $20 and the larger is $30 SOLD.
If you see something you want that has been sitting there for a while don't be afraid to shoot me an offer. Thanks for looking.
Last edited:
