Bird and Trouts
These blades are the first two of a batch of 25 knives cut from Aldo's .110" Nitro-V. These have all been heat treated to 61 HRC and hand sanded to 800 grit. The spine has been rounded significantly and it is extremely comfortable.
Specifications-
Custom sheathes come with each knife. These were made from a good friend of mine, Brett Smith of T-Star Leather in Oklahoma. He does phenomenal work, the sheathes are just beautiful!
Price is $300 each (plus $7.50 shipping CONUS).
Funayuki Kitchen Knife
Much like the two blades I just posted in the Fixed blade sub forum, This knife is one of 25 I had cut from Aldo's .110" Nitro-V. This has been heat treated by Paul Farned at Paul Bos heat treat to 63 HRC.
Specifications-
I have not made a saya for this knife. Unless requested, it sells as is without a saya.
Price is $400 (plus $7.50 Shipped CONUS)
I apologize, the picture quality isn't great. All I gave to work with is my phone. If there are any questions or you want more pictures, I would be happy to help.
Thank you for looking!
-Tanner Saslow
These blades are the first two of a batch of 25 knives cut from Aldo's .110" Nitro-V. These have all been heat treated to 61 HRC and hand sanded to 800 grit. The spine has been rounded significantly and it is extremely comfortable.
Specifications-
- .110" Nitro-V @ 61HRC
- West Systems G-Flex epoxy
- Stainless corby bolts used
- Thickness behind the edge is ~.005"
- OAL is 8 3/8"
- Blade length is a touch under 4"
- 1 1/8" tall at the start of the edge
- Weight reduction holes in the tang
- My signature is engraved neatly on the spine
Custom sheathes come with each knife. These were made from a good friend of mine, Brett Smith of T-Star Leather in Oklahoma. He does phenomenal work, the sheathes are just beautiful!
Price is $300 each (plus $7.50 shipping CONUS).
Funayuki Kitchen Knife
Much like the two blades I just posted in the Fixed blade sub forum, This knife is one of 25 I had cut from Aldo's .110" Nitro-V. This has been heat treated by Paul Farned at Paul Bos heat treat to 63 HRC.
Specifications-
- .110" NITRO-V @ 63 HRC
- .005" behind the edge
- All edges on the blade are rounded over fro comfort
- Finished to 800 grit
- OAL is 9 3/8"
- Blade is 4 3/8"
- 1 3/8" tall at the start of the edge
I have not made a saya for this knife. Unless requested, it sells as is without a saya.
Price is $400 (plus $7.50 Shipped CONUS)
I apologize, the picture quality isn't great. All I gave to work with is my phone. If there are any questions or you want more pictures, I would be happy to help.
Thank you for looking!
-Tanner Saslow