Gevir Knives
Hand made knives out of Nova Scotia, Canada
- Joined
- Jun 11, 2015
- Messages
- 100
I'm selling off these two knives i recently just made. Completely different sizes/styles. Each comes with a handmade leather sheath, both right handed and being made as we speak
Both knives are made from a 32" diameter sawmill blade by stock removal. The metal was tough, I have to anneal it to drill holes and grind, Charcoal forge heat treat with oil quench then the temper is put back in over a 3-4 hour period
the metal had a lot of existing character left in, amplified by a bleach/gun blue soak, then the taper is hand sanded to 600 grit, then gun blued again to have a nice contrast between edge and body
Paypal or e-transfer accepted, email daggerscove@gmail.com if you're interested
First up is small utility knife , good everyday carry too , solid flat grind
knife is 6" long, 1 3/4" at it's widest and about 5/32" thick.
handle is bocote with a grey denim handmade micarta
asking $120 US +$15 for shipping



next up a bit of a re-post
Super fun one. A Recycled file knife. I had to keep most of the file, the texture makes the knife i think. I usable blade.
The knife is 8 " in total length,
Blade is 4 inches
apporx. 1/8" thick
Thuya burl handle with wenge spacer.
****SOLD*****



Both knives are made from a 32" diameter sawmill blade by stock removal. The metal was tough, I have to anneal it to drill holes and grind, Charcoal forge heat treat with oil quench then the temper is put back in over a 3-4 hour period
the metal had a lot of existing character left in, amplified by a bleach/gun blue soak, then the taper is hand sanded to 600 grit, then gun blued again to have a nice contrast between edge and body
Paypal or e-transfer accepted, email daggerscove@gmail.com if you're interested
First up is small utility knife , good everyday carry too , solid flat grind
knife is 6" long, 1 3/4" at it's widest and about 5/32" thick.
handle is bocote with a grey denim handmade micarta
asking $120 US +$15 for shipping



next up a bit of a re-post
Super fun one. A Recycled file knife. I had to keep most of the file, the texture makes the knife i think. I usable blade.
The knife is 8 " in total length,
Blade is 4 inches
apporx. 1/8" thick
Thuya burl handle with wenge spacer.
****SOLD*****



Last edited: