Two More EDCs

Feedback: +119 / =0 / -0
Joined
Feb 1, 2010
Messages
1,312
SPECS:

Viper
1/8 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is Jute cordage wrapped onto knife's full tang and soaked with penetrating epoxy. Under the wrap is sealed with Loctite Blackmax.

Blade Length is 4.3 inches from tip to wrap.

Blade is forged with hammer marks and forging scales left for a primitive look

Overall Length is about 8.7 inches

Sheath: Coyote brown Kydex (shown) with holes spaced for large and small Tek-lok

SOLD Price is $45 plus $7 shipping in US with Kydex Sheath
img1066zo.jpg


img1069le.jpg


img1063ap.jpg


img1065lm.jpg



Wharncliffe
1/8 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is Coyote Brown paracord wrapped onto knife's full tang. Under the wrap is sealed with Loctite Blackmax.

Blade Length is 4.1 inches from tip to wrap with dark flats and ground bevels.

Overall Length is about 8.2 inches

Sheath: Coyote Brown Kydex (shown) with holes spaced for large and small Tek-lok

SOLD (Price is $40 plus $7 shipping in US with Kydex Sheath)
I prefer PayPay (my account is kelley_ward2@agilent.com)
img1083ta.jpg


img1085do.jpg


img1078si.jpg


img1080fw.jpg

I prefer PayPay (my account is kelley_ward2@agilent.com), major credit cards over the phone (707-479-2530), money orders and checks.
Thanks,
Kelley Ward
Hard Edge Knives
 
Last edited:
Back
Top