Hey Fellas, I haven't put anything up here for a while so here we go!
First up is a clip point hunter with 3V steel, Grade 4 titanium guard, and stabilized curly claro walnut from Burl source. The fit and finish is quite good on this knife. I figured I'd see if anyone wants this before I made the sheath. I'm a lefty and this one may stay on my hip if it doesn't go quick. The sheath will be a welted leather model probably with a retention strap. My leather work is not fancy but it is sturdy and neat.
Specs:
OAL 10.5"
Blade 5.25x1.875 at widest x .175"
Steel 3V @60rc with cryo from Peters
Scales stabilized curly claro with black g10 liners
$400 plus $10 shipping, international will be actual cost
Pics:
[/URL] Uploaded with ImageShack.us[/IMG]
Uploaded with ImageShack.us
[/URL] Uploaded with ImageShack.us[/IMG]
[/URL] Uploaded with ImageShack.us[/IMG]
Next is a monstrous chopper! Same deal with the sheath. The customer will have input on the sheath design. This one is made from Bohler-Uddehold Vanadis 4E steel. This is a really hard steel to find, but is one of the most exciting I've tried. In between M4 and 3V in both toughness and wear resistance, so what you get is a great hard use steel that will hold an edge in a lot of different applications and you get BU's superior 3rd gen PM process. Hand rubbing this blade nearly drove me insane. I can't say enough about the quality of this steel. The pics say a lot more than I can here...hard to tell the spine is rounded over the entire length for comfort.
Specs:
OAL 15"
Blade 9"x2.75" at widest x .350" at ricasso, tapering both ways
Steel Vanadis 4E @62 with cryo from Peters
Scales lightning strike cf with red and black liners
$650 plus $10 shipping, international will be actual.
Pics:
[/URL] Uploaded with ImageShack.us[/IMG]
[/URL] Uploaded with ImageShack.us[/IMG]
[/URL] Uploaded with ImageShack.us[/IMG]
[/URL] Uploaded with ImageShack.us[/IMG]
Thanks for looking!
First up is a clip point hunter with 3V steel, Grade 4 titanium guard, and stabilized curly claro walnut from Burl source. The fit and finish is quite good on this knife. I figured I'd see if anyone wants this before I made the sheath. I'm a lefty and this one may stay on my hip if it doesn't go quick. The sheath will be a welted leather model probably with a retention strap. My leather work is not fancy but it is sturdy and neat.
Specs:
OAL 10.5"
Blade 5.25x1.875 at widest x .175"
Steel 3V @60rc with cryo from Peters
Scales stabilized curly claro with black g10 liners
$400 plus $10 shipping, international will be actual cost
Pics:
Uploaded with ImageShack.us
Next is a monstrous chopper! Same deal with the sheath. The customer will have input on the sheath design. This one is made from Bohler-Uddehold Vanadis 4E steel. This is a really hard steel to find, but is one of the most exciting I've tried. In between M4 and 3V in both toughness and wear resistance, so what you get is a great hard use steel that will hold an edge in a lot of different applications and you get BU's superior 3rd gen PM process. Hand rubbing this blade nearly drove me insane. I can't say enough about the quality of this steel. The pics say a lot more than I can here...hard to tell the spine is rounded over the entire length for comfort.
Specs:
OAL 15"
Blade 9"x2.75" at widest x .350" at ricasso, tapering both ways
Steel Vanadis 4E @62 with cryo from Peters
Scales lightning strike cf with red and black liners
$650 plus $10 shipping, international will be actual.
Pics:
Thanks for looking!
Last edited:
