Uddeholm PM Vanadis 4E 3,8 mm thick Kephart in Olive Wood with leather sheath

[KornalskiKnives]

Uddeholm PM Vanadis 4E 3,8 mm thick Kephart in OLIVE Wood with leather sheath

Blade: Vanadis 4E PM Steel 3.8 mm, 63 HRC HT for max. wear resistance )HT from 1080C and tempered in 555C twice
Coating / blade finish: Stonewashed
Handle: OLIVE Wood, Stainless Torx security screws
Sheath: MKLeather handmade leather sheath (Two position or standard to choose)

Weight: 250 g
Total length: 260 mm
Blade length: 125 mm (5")
Blade width: 33 mm (~1,3")

Asking: SOLD with shipping by Global Express with full tracking --> bank transfer to US Bank or Revolut payment or PayPal

--------------------------------------------------------------------------------------------
Knife: Chopper150
Steel: O2 Tool Steel
Thickness of 4,0 mm
Hardness: ~60 HRC
Handle: G10 plus red 1 mm linners - sandblasted
Attachment: Turn black torx M4 A2 screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 290 mm
The width of the blade: 36 mm
Blade 150 mm
Sheath: 3mm black ABS 2 mm with Big TekLok

Asking: SOLD for shipping with Global EXPRESS with full tracking

---------------------------------------------------------------------------------------------------------------------
Knife: Cwaniak XXL
Steel: O2 Tool Steel
Thickness of 4,0 mm
Hardness: ~60 HRC
Handle: G10 plus red 1 mm linners - sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash after fine sandblasting
Size:
Total length: 280 mm
The width of the blade: 42 mm
Blade 135 mm
Sheath: 3mm black ABS 2 mm with Big TekLok

Asking: SOLD for shipping with Global EXPRESS with full tracking

 

[beeinak]

Adam: I am interested in the Chopper 150, but I sent you an email Saturday if you have a chance to look at it please.
Brian

 

[KornalskiKnives]

Adam: I am interested in the Chopper 150, but I sent you an email Saturday if you have a chance to look at it please.
Brian

Brian from Alaska ) I missed your email ;(
Brrrr...

K720 is O2 tool steel. It is good and cheap.
Well hardened is quite tough and easy to sharpen even in the woods.
Holds edge satisfactorily..

If used with the mind will serve well and long.
1% of chromium makes it quite rusty but after some time it covers with patina and that is it.

When you want working horse for quite little money the choice is good.
O2 was used for cutting knives in axle lathes in Poland some years ago.

regards

Adam

 

[jfk1110]

Nice work!!

 

[mycough]

The Kephart is a nice piece of kit, the olivewood makes it for me.

 

[beeinak]

Brian from Alaska ) I missed your email ;(
Brrrr...

K720 is O2 tool steel. It is good and cheap.
Well hardened is quite tough and easy to sharpen even in the woods.
Holds edge satisfactorily..

If used with the mind will serve well and long.
1% of chromium makes it quite rusty but after some time it covers with patina and that is it.

When you want working horse for quite little money the choice is good.
O2 was used for cutting knives in axle lathes in Poland some years ago.

regards

Adam

Adam:
I want thank you for responding here as well as by email. I love the knife I got from you previously and look forward to getting this next one. You are great to deal with and make fantastic, ergonomic knives.