- Joined
- Dec 28, 2020
- Messages
- 158
Some up for sale.
Claim your knife in this post before PM/email. U.S. shipping only.
Payments are in F&F only.
First claim honored, though I reserve the rights to sell to whomever.
Once claimed, payments await for 6 hours, then back on the market.
Please do not include the word "knife/knives" in PayPal note sections.
All includes original packaging, unless otherwise noted.
Deduct $10 for each additional knives.
Total above $100 will be shipped Priority. Under $100 will be shipped First-Class.
No interest in trades atm.
Prices are firm.
Last but not least, please know your state/jurisdiction regulations regarding knives.
Good luck!
Sorry, a bit lazy to take close up pics. Pics and videos are available upon request.
Microtech UTX-70 | m390 | Grey Alum -$105 F&F sold
Continuously misfired. Based on what I read from Microtech's forum/sites, it might be due to dirt and just need a cleaning. I do not have the tool to take it apart, and a bit lazy to go through the Microtech's warranty process. Knife itself is pretty much brand new. Edge was used to cut paper to test for chips/rolls/bur, etc. No box. Will ship with a Hogue pouch.
Protech Emerson CQC-7 | 154-cm Chisel grind | Gray/Blue Unique Micarta and Aluminum Handles, Mosaic Pin Button -$205 -> $155 F&F sold
Carried a few times. Has only cut paper to test for sharpness / edge defects.
Claim your knife in this post before PM/email. U.S. shipping only.
Payments are in F&F only.
First claim honored, though I reserve the rights to sell to whomever.
Once claimed, payments await for 6 hours, then back on the market.
Please do not include the word "knife/knives" in PayPal note sections.
All includes original packaging, unless otherwise noted.
Deduct $10 for each additional knives.
Total above $100 will be shipped Priority. Under $100 will be shipped First-Class.
No interest in trades atm.
Prices are firm.
Last but not least, please know your state/jurisdiction regulations regarding knives.
Good luck!
Sorry, a bit lazy to take close up pics. Pics and videos are available upon request.
Microtech UTX-70 | m390 | Grey Alum -
Continuously misfired. Based on what I read from Microtech's forum/sites, it might be due to dirt and just need a cleaning. I do not have the tool to take it apart, and a bit lazy to go through the Microtech's warranty process. Knife itself is pretty much brand new. Edge was used to cut paper to test for chips/rolls/bur, etc. No box. Will ship with a Hogue pouch.
Protech Emerson CQC-7 | 154-cm Chisel grind | Gray/Blue Unique Micarta and Aluminum Handles, Mosaic Pin Button -
Carried a few times. Has only cut paper to test for sharpness / edge defects.
Last edited:
