Vanadis4E and M390 three new knives

KornalskiKnives

KornalskiKnives

Knifemaker / Craftsman / Service Provider
Feedback: +88 / =0 / -0
Joined
Sep 12, 2014
Messages
1,088
Hi,

To all costs posted in the thread --> you need to add 5% for PayPal fee.

SHIPPING - FREE !! - 10 days priority parcel with value.

------------------------------------------------------------------------------------------------------------------------------------------------
Three new knives:

From the top:

Knife I

Knife: Krypton
Steel: M390 PM Tool Steel
thickness of 4.3 mm
Hardness: 61 HRC
Handle: Black G10 sandblasted with red liners 2 mm hips
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 298 mm
The width of the blade: 40 mm
Blade 170 mm
Weight 309 g.
Sheath: ABS 2 mm black sheath

SOLD

Knife II

Knife: MIKKO
Steel: Vanadis 4 Extra Tool Steel
thickness of 4,75 mm
Hardness: 64 HRC Secondary hardness
Handle: Black G10 sandblasted
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 275 mm
The width of the blade: 43 mm
Blade 135 mm
Weight 352 g.
Sheath: ABS 2 mm black sheath

Asking price: 225 USD

Knife III

Knife: AgorEDC
Steel: Vanadis 4 Extra Tool Steel
thickness of 3,96 mm
Hardness: 64 HRC Secondary hardness
Handle: NONE
Attachment: N/A
Finish blade: Stonewash
Size:
Total length: 250 mm
The width of the blade: 31 mm
Blade 120 mm
Weight 240 g.
Sheath: ABS 2 mm black sheath


Asking price: 200 USD


20170204 - 1.JPG



20170204 - 2.JPG



20170204 - 3.JPG


-------------------------------------------------------------------------------------------------------------------------------------------------
From the top:

Knife I

Knife: Krypton
Steel: Vanadis 4 Extra Tool Steel
thickness of 4.75 mm
Hardness: 64 HRC
Handle: Black G10 sandblasted with red liners 1 mm hips
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 295 mm
The width of the blade: 40 mm
Blade 165 mm
Weight 342 g.
Sheath: NONE

SOLD

Knife II

Knife: Agor
Steel: M390
thickness of 4,3 mm
Hardness: 62 HRC Secondary hardness
Handle: Black G10 sandblasted with red liners 1 mm hips
Attachment: Turn stainless steel screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 32 mm
Blade 1140 mm
Weight 216 g.
Sheath: NONE

Asking price: 180 USD

Knife III

Knife: Kiridashi
Steel: S390 Bohlem PM HSS Tool Steel
thickness of 3,96 mm
Hardness: 65 HRC Secondary hardness
Handle: NONE
Attachment: N/A
Finish blade: Stonewash
Size:
Total length: 150 mm
The width of the blade: 16 mm
Blade 56 mm
Weight 35,6 g.
Sheath: NONE

SOLD

Knife IV

Knife: Kiridashi
Steel: S390 Bohlem PM HSS Tool Steel
thickness of 3,96 mm
Hardness: 65 HRC Secondary hardness
Handle: NONE
Attachment: N/A
Finish blade: Stonewash
Size:
Total length: 145 mm
The width of the blade: 15 mm
Blade 47 mm
Weight 29,7 g.
Sheath: NONE

Sold

20170202 - 1.JPG


20170202 - 2.JPG


20170202 - 3.JPG
 
Last edited:
I love you knives and have been contemplating on buying one for a while but always end up purchasing something else. Though I'm absolutely ecstatic over this krypton. Is there anyway you could make another one to the exact same specs but with red handles, do you ever make 8 inch blades, and do you ever make sheaths?
 
Hey Jamall,

Very nice work been looking at your stuff for awhile and really like it.

Two questions.

Can you tell me a little about S390 steel?

Do you offer sheaths?

Thanks,
Adam
 
MikeyT33 said:
I love you knives and have been contemplating on buying one for a while but always end up purchasing something else. Though I'm absolutely ecstatic over this krypton. Is there anyway you could make another one to the exact same specs but with red handles, do you ever make 8 inch blades, and do you ever make sheaths?
Click to expand...

I do not have blanks cut with V4E for now. It is the last one. I have one with M390 but has scales made already (black with red).
I can make any knife you want. Think made one with M390 180 mm long.
For 200 mm knives I think 4,3 mm is to thin but can use 5,3 mm M390 ;)
Think also can buy 5.7 mm Vanadis 4 extra thick ;)
I can make sheath for each of my knives.
Leather - 25$
ABS 2 mm - 15$


adamrockcrawler said:
Hey Jamall,

Very nice work been looking at your stuff for awhile and really like it.
Two questions.
Can you tell me a little about S390 steel?
Do you offer sheaths?
Thanks,
Adam
Click to expand...

1. S390 it is PM HSS steel from Bohler.
In my opinion M2(HSS) steel is the best steel for knife.
S390 is that steel but made in Powder Metallurgy technology.
What is better with this - grains inside the steel are smaller and steel is much more cleaner.
Better cut edge, less cracks but much more expensive ;)
This is the most expensive steel I ever used.

AND

you can use knive in 1100F temperature and it will be still working perfectly - yes it is very important when using knife on VENUS or Mercury ;)

2. As above - sheaths can be made to each of my knife but will cost 15 or 25$ more.

Thanks for kind words.

Regards

Adam
 
So a survival knife made of 5 mm s390 steel would be interesting. You could cauterize a wound with the knife and the heat treatment would still be unaffected. A krypton would be nice!
 
Very nice work, Jamall. I especially like the first one. I have never been tempted to buy a chopper, but if you designed one with a blade about 250mm and a 135mm handle, I would almost certainly have to have one! Any chance you may be doing one larger than the Krypton?

Again, very nice work, sir.
 
I'll take backup on Knife #3, the Kiridashi with larger handle. Email me at rdangerer@gmail.com and I'll paypal promptly.

If that is sold, I'll take Knife #4, Kiridashi with smaller handle. [Paypal sent for #4]
 
Last edited:
1. Hugo - I got S390 and S290 heat treated already by professional institute of metalurgy in Poland ;)
So I have what my friends got as an waist ;) Steel is superb, expensive but this is not the problem
HT proccess is a problem. You have to use protective atmosphere for HT to get the best from HSS steel.
I use inox foil and this is not the best way to harden HSS steels.

2. TRfromMT - please find me on Instagram or Facebook (KornalskiKnives) you will see 500(20") long knives with 12 mm steels ;)
Can make anything - ask Hugo ;) He owns some of my productions ;)

3. Stephen I answedred to your mail ;)

4. Rob we will wait for Brummie than send III or IV.

Regards

Adam
 
I found your IG page and am following now. And I'm probably going to get I trouble with the home budget committee soon! :D
 
TRfromMT said:
I found your IG page and am following now. And I'm probably going to get I trouble with the home budget committee soon! :D
Click to expand...

Have you seen those monsters, TRfromMT? Trust me, you ain't seen nothing yet! My next Adams knife will be epic!!!!
 
You must log in or register to reply here.
Back
Top