vfd help!!!!!

[jared yerger]

Hey everyone! I am starting a grinder build. I bought a Dayton 1.5hp 3ph motor. I also picked up a teco fm50 drive model 402-c. I'm not good with electrical stuff at all. In my shop I only have the standard household power. Not the 220. Sooo my question is did I mess up with the vfd? The input on the drive says 460v 3 phase. Thanks for your help

 

[12345678910]

Hey everyone! I am starting a grinder build. I bought a Dayton 1.5hp 3ph motor. I also picked up a teco fm50 drive model 402-c. I'm not good with electrical stuff at all.



In my shop I only have the standard household power. Not the 220.

The input on the drive says 460v 3 phase. Thanks for your help

You cannot use that.


The only VFD I know of that will run 1.5hp on 120 volts - single phase input is

KB electronics
KBAC27D
9520


http://www.kbelectronics.com/manuals/kbac_manual.pdf

http://www.kbelectronics.com/data_sheets/kbac.pdf

http://www.kbelectronics.com/s_find.php?db=dd

 

[jared yerger]

Thanks for the info