Victorinox SAKs with pocket-clips, Buck Vantages, Gerber Center Drive, MP600 Pro Scout

Status
Not open for further replies.

chiral.grolim

Universal Kydex Sheath Extension
Feedback: +79 / =0 / -0
Joined
Dec 2, 2008
Messages
6,422
These are production Victorinox SAKs, all purchased new-in-box, then modified by addition of a pocket-clip directly to the non-presentation alox scale (orients the knife for right-front-pocket tip-up carry of main blade).

These make great gifts and are very office-friendly. Adding the pocket-clip increases the likelihood that the owner will carry and thereafter enjoy using the knife. Don't miss out!

Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.

Limited Edition 2018 Berry-red Pioneer ($58)
Blue Pioneer ($old)
Black Pioneer ($old)
Silver Pioneer ($50)
Electrician ($55)
Rancher ($55)
Pioneer X ($58)

If you don't see a model you'd like clipped, just let me know and I can order and clip one for you. Here is a link to more photos: https://imgur.com/a/gzGsrYt

The gray clips are a bit darker than the silver scales, the Black clip looks really good on the dark-gray and the black scaled Pioneers. The clips are stainless steel, the screws are tapped directly into the aluminum. Other than the addition of the clip, each knife is brand-new-in-box.

Post "I'll take the ***** " indicating which knife and send me a PM or e-mail to follow up for payment information. Thanks for looking!
bBlElrS.jpg

RYeF5I9.jpg

A8qtvmg.jpg
jA2UIT6.jpg


gAYjnnr.jpg


bWI757g.jpg

52bxMHh.jpg

tdXuTOk.jpg


lDLbZD2.jpg


Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.

I have 3 variations of the Buck Vantage series available.

UI3004C.jpg
lwEbpds.jpg
QFXsIoO.jpg
ty2ANiA.jpg


One is a Buck Vantage Force Select but I have swapped the regular scales for a set of G10 scales from a Vantage Pro. The knife is otherwise brand new, never carried or used. I added some oil and it flips well, does have a strong/stiff liner. $50.
jcTty80.jpg
l68yr4F.jpg


I have a Vantage Avid with 13C26 (aebl) steel blade and diamondwood scales. This one has been carried and used, is now shaving-sharp again, and the action is wonderful, best of the lot. I also added a backspacer from a Vantage Force, can switch it to the regular spacer if you'd like the standard design. Buck disco'd the 13C26 blades, hard to find and great to work with.
$70

fksDV8w.jpg
xjD8OBv.jpg
ciVmOSI.jpg


Last, a Vantage Select with plastic sales, the blade is well used but again shaving sharp, I did lower the point a bit, and I could swap the Force spacer from the Avid to this one if desired.
$25.

PUNMiYL.jpg


Prices are USD and include shipping via USPS with tracking, international buyers must help defray extra. Buyer must conform to all national/state/local laws and assumes legal responsibilities.
 
Gerber Center Drive Black, #30-001427
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-To...t-Set-Black-Berry-Compliant-Sheath-_30-001427

The multitool is new-without-box but includes paperwork. I don't have the Gerber-brand sheath to go with it but am including a Condor MA32 Single Pistol Magazine Utility Pouch as seen in the photos. The tool DOES come with the M4/M16 bit set as seen in the Gerber link (forgot to snap a photo), but the bit-set doesn't fit well in the sheath along with the tool. The sheath is adjustable and fits the tool very well.

$75 USD including shipping to a US address, international costs extra.
7idRmQo.jpg
gu0uYCT.jpg

Jb0kdDu.jpg





Gerber MP600 Pro Scout # 47563
Here is the link to Gerber's site: https://www.gerbergear.com/Multi-Tools/One-Hand-Opening/MP600_47563

The multitool is new-without-box but includes paperwork and sheath.

$50 USD including shipping to a US address, international costs extra.

I can offer a MOD on this tool (for a little more $$), re-arranging the tools and modifying the handles to allow the needle-nose to retract further in and lock in place if desired. Let me know.

d9dPjW1.jpg
f5yysnG.jpg
vDQMCB4.jpg
0rDZ95d.jpg
MUlC6pT.jpg
BMY3hWd.jpg
 
Last edited:
One Pioneer X sold and shipped.

I do have another Pioneer X on hand if anyone is interested :thumbsup:
 
Status
Not open for further replies.
Back
Top