heres a hunter i just finished up, i forged it from W2, and clay quenched to give a pretty decent hamon. The blade has a hand rubbed ,etched and polished, leaving a nice working finish. The scales are tri color g-10 over 1/8'' black g10 liners.
measures just over 9'' in length, and has a cutting edge of just under 4 1/2'', slight taper to the tang, the swedge is ground but not sharpened, its there more to assist in penetration that it is to cut.
scales are epoxied as well as fastened on with 416 s.s. corbys,
price is $225 with sheath.
paypal and credit card accepted, other payment options can be discussed
**after taking pic, i did go back and remove the scratch in the g-10 just forward of the front pin**
measures just over 9'' in length, and has a cutting edge of just under 4 1/2'', slight taper to the tang, the swedge is ground but not sharpened, its there more to assist in penetration that it is to cut.
scales are epoxied as well as fastened on with 416 s.s. corbys,
price is $225 with sheath.
paypal and credit card accepted, other payment options can be discussed
**after taking pic, i did go back and remove the scratch in the g-10 just forward of the front pin**
Last edited:
