Want a tank of a utility folder? CS Pocket Bushman!

I am still thinking of getting one. I just don't know yet. I really don't like surgery & stitches! I wonder if the Okapi clone might be better/safer to use?
 
I had been on the fence about this knife. I really like it's looks from the pictures I've seen, and the operation, specifically the lock, seems to be really unique, so I went ahead and ordered two of them as I wanted to get one for my son. Now I'm going to have to see if the handle can be drilled and tapped so that I can mount the clip for low ride duty. Should make a nice one for working and beating.:thumbup::)
 
Or a Mercator Cat from Solingen.

It's interesting the Youtube shows one method of locking, and the webpage pops up what looks like packaged instructions using a different method. Obviously more than one way to do it.

What I see is a modding platform that could be dremel shaped to a more graceful user - drop point, relieved choil, less frame spikes, and maybe even enhanced with grips. For a "truck" knife, it has a lot.
 
I just got mine, thanks to this review. I really like it, a solid folder. The blade steel, while not high end, is one of my favorites. This, plus the long hunter they have out now, are some great values!
 
According to Cutlerylover's review, yes you can but it's quite uncomfortable.

It's an interesting knife, for that price Im going to try it out. And I agree that this is more like an camp backup knife you use at times, not like edc.
 
I'm carrying mine to break it in, in hopes of finding things to cut. I think it would make a good carry knife, complimenting a small slippie. That combo should handle most needs.
 
MORIMOTOM said:
seems like the lock is certainly strong...

but has to be the goofiest system i can remember seeing. what happens if the lanyard breaks? can it be closed otherwise?
Click to expand...

Sure. Pop a small stick through the hole. It's not THAT stiff. The lanyard is 550 paracord. Hard to imagine what would destroy that under normal use. However, if breakage is that much of a concern just run a large split ring through it like on an Okapi.;)
 
I am a big fan of CS folder designs. I have owned many products from ColdSteel. I have much more expensive knives, but still always like looking at their new products. When I have some one ask for inexpensive strong knives I typically think of CS. When you get into their higher priced items, I typically steer friends towards other makers. Even though I like their higher priced items, I think there are somewhat better values elsewhere.

I want one of these to put in each of my vehicles, even though I always have at least one expensive fixed blade in my pocket or on the belt (and have at least one cheap CS fixed blade in the tool box).

This is why CS remains relevant. They always have new products, and old standbys (like hawks, and spears etc)
 
Last edited:
FortyTwoBlades said:
Sure. Pop a small stick through the hole. It's not THAT stiff. The lanyard is 550 paracord. Hard to imagine what would destroy that under normal use. However, if breakage is that much of a concern just run a large split ring through it like on an Okapi.;)
Click to expand...

Needing a tool other than my thumb to close a folder is odd imo.
 
Mine came in this afternoon thanks to Gary Moore shipping them express mail. I like them and am really surprised at the quality of the knife for $30. Edge on mine came razor sharp as did my son's. Unlocking is not a problem as long as it is done right. For the first time I have found a knife I cannot open in one motion, can get about halfway and then it takes my thumb to go the rest of the distance. I have to agree with the assessment about the rock solid lockup of this knife, and it is hard to imagine it closing accidently. I plab on trying to mount the clip higher for a low ride, as I have carried it this afternoon and I love how flat it is. Speaking of flat, the center of the handle does swell out for about 3" in the length of the handle. I used some stiff paper and cut a template, then cut out two pieces of the 3M Stair Step tape I am always covering things with, and applied them to the handle. I had to remove the clip and while I had it off I covered the clip with the same tape. It makes a difference in the grip for sure. At a glance it looks like there is black inlaid handle material in place! I agree with the poster who said this knife could be a great platform for modifications, and I look forward to doing some modifying!
 
The 4116 Krupp has always been a bit of a mystery to me. It replaced some of Cold Steel's 420 blade offerings, but I've yet to hear whether the steel is anywhere near as good as CS claims (they have been known to slightly exaggerate). This is one knife that has really never appealed to me in the slightest, and after watching the video, I'm not sure that I would have any need, ever, for that kind of strength in a bladesize of only 4.5 inches.

scotchleaf said:
DO NOT BUY A POCKET BUSHMAN - AN ACCIDENT WAITING TO HAPPEN - I have 6 weeks+ of rehab and a multi thousand dollar bill from the docs to prove it.:eek:
Click to expand...
I found this posted elsewhere, and I have to say it's probably a good knife to get to know. Seems like it might be the knife version of a Glock.
 
solidsoldier said:
This knife screams "work knife" and has little tactical value other than a fistload or pocket stick.
Click to expand...

That depends on whether you're a ninja or not. :D

The pocket bushman is very well suited for quarter spin knife throwing. I'm serious about this; it is perfectly balanced for the job, it hits hard, and it punches deep.
 
Confederate said:
The 4116 Krupp has always been a bit of a mystery to me. It replaced some of Cold Steel's 420 blade offerings, but I've yet to hear whether the steel is anywhere near as good as CS claims (they have been known to slightly exaggerate). This is one knife that has really never appealed to me in the slightest, and after watching the video, I'm not sure that I would have any need, ever, for that kind of strength in a bladesize of only 4.5 inches.


I found this posted elsewhere, and I have to say it's probably a good knife to get to know. Seems like it might be the knife version of a Glock.
Click to expand...

In talking with Gary Moore, Gary made the comment to me that Kevin Wilkens, knifemaker in Germany, and maker of the Griptilkens on Gary's site, was very impressed with this Krupp offering, saying that it was a very good mid range steel.
 
In my opinion, if you have to post a video on how to close a knife without cutting yourself there's either something wrong with your knife design or with your customer base.
 
Tomorrow I'll be pulling the blade to smooth out the opening. If you think of the tang-lock interface like a cam, you can tell where it needs to be ground. I'll be taking it slow.
 
looks incredibly cool, almost steampunk

dunno about that lock tho

and damnit i must still get me a regular bushman, and now they've got this aswell
 
You must log in or register to reply here.
Back
Top