benthughes
Gold Member
- Joined
- Mar 15, 2006
- Messages
- 427
Looking For Busse SAR4 of SAR5 or similar sized Bussekin. All knives in the picture have been carried to some degree but have been only lightly used ( the Police and Spyderhawk have been around a bit but are still solid and sharp). All are plain edged with good lock up and no blade play.
The Karambit is a 511 Tarani Master which is G-10 with an S30V blade
Also have a Scrapper 5 with kydex sheath and a Chris Reeve Pacific. Neither have ever been sharpened or used.
2 of the Spyderco Millies are actually a project of mine in which I took a slab from a titanium military and one from a carbon fiber millie so here's how they play out. One in Carbon fiber/titanium with a S30V blade and framelock. The other Ti/Carbon fiber with liner lock and BG-42 blade. Blue loctite used on all screws after re-assembly. Great lock up an smooth operation on both. These turned out wonderfully as I found the Titanium Military to be on the heavy side. The Carbon fiber slab reduces weight and gives a nice grippy surface. I'd prefer to hold on to these as I'm sure it reduced the value of the knives themselves and neither knife is necessarily cheap. I did it to make what, for me, is the perfect EDC knife.
The Karambit is a 511 Tarani Master which is G-10 with an S30V blade
Also have a Scrapper 5 with kydex sheath and a Chris Reeve Pacific. Neither have ever been sharpened or used.
2 of the Spyderco Millies are actually a project of mine in which I took a slab from a titanium military and one from a carbon fiber millie so here's how they play out. One in Carbon fiber/titanium with a S30V blade and framelock. The other Ti/Carbon fiber with liner lock and BG-42 blade. Blue loctite used on all screws after re-assembly. Great lock up an smooth operation on both. These turned out wonderfully as I found the Titanium Military to be on the heavy side. The Carbon fiber slab reduces weight and gives a nice grippy surface. I'd prefer to hold on to these as I'm sure it reduced the value of the knives themselves and neither knife is necessarily cheap. I did it to make what, for me, is the perfect EDC knife.
Last edited:
