ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,465
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, DireWares, GTC's, Southards, TuffKnives, Sharknivcos, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, a Todd Begg Beggatti, Rassentis, Demkos, some Shirogorovs, Grimsmos, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Strider but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Warren Thomas MSR-1 - brand new - $625
3.5" blade on this one
Chisel ground CPM-154 blade with a satin finish and a polished black G-10 laminate
One-off triple compound grind
Sculpted and contoured black G-10 front slab and over-travel stop
Lockside has Warren's signature ano pattern
Comes unsharpened from the maker but it shouldn't take much to give it a good edge
Not yet completely broken in but has a smooth action with the thumbstud and even works as a front flipper
Locks up tight with no play at all
Centering is dead on
2. EOS Squid - near mint - $475
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, DireWares, GTC's, Southards, TuffKnives, Sharknivcos, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, a Todd Begg Beggatti, Rassentis, Demkos, some Shirogorovs, Grimsmos, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Strider but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Warren Thomas MSR-1 - brand new - $625
3.5" blade on this one
Chisel ground CPM-154 blade with a satin finish and a polished black G-10 laminate
One-off triple compound grind
Sculpted and contoured black G-10 front slab and over-travel stop
Lockside has Warren's signature ano pattern
Comes unsharpened from the maker but it shouldn't take much to give it a good edge
Not yet completely broken in but has a smooth action with the thumbstud and even works as a front flipper
Locks up tight with no play at all
Centering is dead on
2. EOS Squid - near mint - $475
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play
Last edited: