PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 469
$260 + 12 CONUS shipping
click here to view / purchase
grind: convex
blade: 4″
overall length: 8″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: stabilized black nargusta burl handle, natural burlap bolster, mustard liner and divider over burlap liner
handle thickness: 4-4.5/5
hardware: loveless bolts and brass tube
Sheath not included. Sheath options are available on the website.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last few years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a 3 stage normalization before being heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
click here to view / purchase
grind: convex
blade: 4″
overall length: 8″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: stabilized black nargusta burl handle, natural burlap bolster, mustard liner and divider over burlap liner
handle thickness: 4-4.5/5
hardware: loveless bolts and brass tube
Sheath not included. Sheath options are available on the website.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last few years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a 3 stage normalization before being heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
