TenShun705
Gold Member
- Joined
- Nov 13, 2016
- Messages
- 2,927
Howdy BF,
Relisting these from a few weeks back.
Vehement Mongrel | Satin CPM 3V | Bronze Ti w/ Brushed “Bolster”
CONDITION – VERY GOOD: has been used and sharpened. I had a challenging time getting the clip-side of the blade near the ricasso to form a burr, so I ended up raising the bevel a bit higher than the rest of the edge (see pic with red circle). Action is very smooth. Doesn’t drop-shut, but a shake or two will do the trick. Very solid lock-up without any blade-play. No discernible wear, not even on the clip. If it wasn’t for having been sharpened, you most likely wouldn’t be able to distinguish from a like-new one. These don’t pop up too often and I paid $539 ($495+tax) from DLT back in August of 2021.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/DcAC9wbrV2mRnYYG9
Vero Isotope | Hand-Rubbed Satin M390 | Integral Ti w/ Red End-Cut CF Inlay
CONDITION – EXCELLENT: has been carried a handful of times, but never used (may have tested the edge on paper) nor sharpened. Comes with Skiff bearings for which is currently installed – original ones will be included. Action is very fluid – snappier with the middle finger flick, but more subtle with the flipper. Centering is flawless and locks up solid without any blade-play. Only discernible wear may be on the pocket clip, but even then, I’m not quite certain because of the finish overall on the Ti components. I paid $525 direct from Vero back in late July of 2021.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/XVfxQDgr47gh53Aj6
Tactile Turn Maverick | Satin Magnacut | Milled Ti
CONDITION – LNIB: has been pocketed once around the house, but never carried outside. I’ve only tested the edge on paper and it’s quite sharp. Centering looks perfect. Action is very smooth with a drop-shut close. Lockup is very good, but if you muscle it, you may feel a bit of movement – not entirely uncommon with these types of locks, but certainly much more solid than most Benchmade Axis locks I’ve handled. I paid $358+ direct from manufacturer.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/KzM3WWFm39Lh2met7
Giantmouse Franken-Ace Grand | Blackwash Vanadis | OD Green Micarta
CONDITION – VERY GOOD: has been used and sharpened. I basically pulled the scales from a stock OD Green Ace Grand and used the blade, hardware, liners, and clip from the REC exclusive. Very well centered with a solid lock-up – no blade play whatsoever. Very good action with a two-shake close. There are some lighter shades on the blade finish from use, but the only other wear is on the clip. The scales have darkened from handling.
ASKING PRICE: TRADED to
Chad.
https://photos.app.goo.gl/9aS8CsyWiaojgu6w7
ZT 308 | CPM 20CV | Coyote Tan G-10
CONDITION – EXCELLENT: has been carried a couple of times and has cut paper. Still has factory edge. I’ve disassembled it to re-lube and replace the bearings with Skiffs, but have since sold the bearings so it's now running on stock ones. Action is quite smooth. Locks up solid without any blade-play. It will drop-shut close under its own weight with a slight nudge after you disengage the lock-bar. Perfectly centered to my eye. There are (2) highlighted areas on the spine that I circled with very tiny dings – came this way to me from another seller here on BF. Other than that, there is a bit of wear on the end of the pocket clip about the size of a small dot.
ASKING PRICE:$175 F&F/Zelle —> SOLD
https://photos.app.goo.gl/KXyriz7BSdiC7DVj8
TERMS: First "I'll take it" followed by a PM or email (cchild107 at msn dot com) confirming payment will typically get it. UPDATE: I will not ship to a 3rd party shipping company, have had back to back issues and will only ship to residential addresses.
PRICING: references payment via PayPal or Zelle (no knife reference notes, please) and includes shipping (CONUS - no International at this time) via USPS Priority or First Class -- alternative shipping options available upon request (buyer responsible for additional charges so please indicate so in PM or email) -- discounted pricing for F&F/Zelle. Please ensure your PayPal address matched the one you provide me if paying via G&S. I will NOT accept payment through international PayPal accounts and will refund you immediately at your expense (you’ll incur the loss of the fees). Payment expected within a reasonable timeframe unless communicated on ahead of time. Will usually ship within 24 hours of cleared payment unless otherwise discussed beforehand.
All item(s) include original manufacturer packaging and contents unless specified otherwise.
Additional info and images available upon request.
***Please be advised that by posting or sending a private message/email with a commitment to purchase implies you're abiding to your state's laws regarding ownership of any item(s) on this sales post. Also, I ultimately reserve the right to sell to whomever I choose***
Not interested in TRADES currently as I’m trying to recoup funds for another purchase.
Thanks in advance for your time and consideration!
Relisting these from a few weeks back.
Vehement Mongrel | Satin CPM 3V | Bronze Ti w/ Brushed “Bolster”
CONDITION – VERY GOOD: has been used and sharpened. I had a challenging time getting the clip-side of the blade near the ricasso to form a burr, so I ended up raising the bevel a bit higher than the rest of the edge (see pic with red circle). Action is very smooth. Doesn’t drop-shut, but a shake or two will do the trick. Very solid lock-up without any blade-play. No discernible wear, not even on the clip. If it wasn’t for having been sharpened, you most likely wouldn’t be able to distinguish from a like-new one. These don’t pop up too often and I paid $539 ($495+tax) from DLT back in August of 2021.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/DcAC9wbrV2mRnYYG9
Vero Isotope | Hand-Rubbed Satin M390 | Integral Ti w/ Red End-Cut CF Inlay
CONDITION – EXCELLENT: has been carried a handful of times, but never used (may have tested the edge on paper) nor sharpened. Comes with Skiff bearings for which is currently installed – original ones will be included. Action is very fluid – snappier with the middle finger flick, but more subtle with the flipper. Centering is flawless and locks up solid without any blade-play. Only discernible wear may be on the pocket clip, but even then, I’m not quite certain because of the finish overall on the Ti components. I paid $525 direct from Vero back in late July of 2021.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/XVfxQDgr47gh53Aj6
Tactile Turn Maverick | Satin Magnacut | Milled Ti
CONDITION – LNIB: has been pocketed once around the house, but never carried outside. I’ve only tested the edge on paper and it’s quite sharp. Centering looks perfect. Action is very smooth with a drop-shut close. Lockup is very good, but if you muscle it, you may feel a bit of movement – not entirely uncommon with these types of locks, but certainly much more solid than most Benchmade Axis locks I’ve handled. I paid $358+ direct from manufacturer.
ASKING PRICE: WITHDRAWN FOR NOW
https://photos.app.goo.gl/KzM3WWFm39Lh2met7
CONDITION – VERY GOOD: has been used and sharpened. I basically pulled the scales from a stock OD Green Ace Grand and used the blade, hardware, liners, and clip from the REC exclusive. Very well centered with a solid lock-up – no blade play whatsoever. Very good action with a two-shake close. There are some lighter shades on the blade finish from use, but the only other wear is on the clip. The scales have darkened from handling.
Chad.
https://photos.app.goo.gl/9aS8CsyWiaojgu6w7
CONDITION – EXCELLENT: has been carried a couple of times and has cut paper. Still has factory edge. I’ve disassembled it to re-lube and replace the bearings with Skiffs, but have since sold the bearings so it's now running on stock ones. Action is quite smooth. Locks up solid without any blade-play. It will drop-shut close under its own weight with a slight nudge after you disengage the lock-bar. Perfectly centered to my eye. There are (2) highlighted areas on the spine that I circled with very tiny dings – came this way to me from another seller here on BF. Other than that, there is a bit of wear on the end of the pocket clip about the size of a small dot.
ASKING PRICE:
https://photos.app.goo.gl/KXyriz7BSdiC7DVj8
TERMS: First "I'll take it" followed by a PM or email (cchild107 at msn dot com) confirming payment will typically get it. UPDATE: I will not ship to a 3rd party shipping company, have had back to back issues and will only ship to residential addresses.
PRICING: references payment via PayPal or Zelle (no knife reference notes, please) and includes shipping (CONUS - no International at this time) via USPS Priority or First Class -- alternative shipping options available upon request (buyer responsible for additional charges so please indicate so in PM or email) -- discounted pricing for F&F/Zelle. Please ensure your PayPal address matched the one you provide me if paying via G&S. I will NOT accept payment through international PayPal accounts and will refund you immediately at your expense (you’ll incur the loss of the fees). Payment expected within a reasonable timeframe unless communicated on ahead of time. Will usually ship within 24 hours of cleared payment unless otherwise discussed beforehand.
All item(s) include original manufacturer packaging and contents unless specified otherwise.
Additional info and images available upon request.
***Please be advised that by posting or sending a private message/email with a commitment to purchase implies you're abiding to your state's laws regarding ownership of any item(s) on this sales post. Also, I ultimately reserve the right to sell to whomever I choose***
Not interested in TRADES currently as I’m trying to recoup funds for another purchase.
Thanks in advance for your time and consideration!
Last edited:
