Factory Non-Flipper XM-18 3" w/ RHK Titanium Scale
Withdrawn
No trades for now.
I'm at least the second owner of this one. I received it as LNIB in factory configuration. It's been carried a bit but there are no signs of wear that stand out against the Working Finish, with only a few faint snail trails on the flamed clip. Excellent action, centered, solid lockup with no lock stick. The pivot screw has a bit of shine around the edge of the screw head since it stands proud of the scale and gets rubbed a bit. All hardware is clean with no marring. All parts are genuine RHK except for the TiConnector clip/tab screws. Comes with all original RHK bags and boxes for the knife and hardware, tri-way bronze washer parts, Skiff Thick Washers - No nylon washers are included. Currently riding on factory bearings. Does not include original liner or G10 scale.
Add-ons and mods include:
18 DPS mirrored edge from a Wicked Edge system. The mirror finish isn't perfect anymore due to a few marks from light use but you have to look under the right lighting to see it. Edge was done very carefully with nice even bevels, and a tiny micro bevel with a 2200 grit diamond WE stone.
RHK Battle Blue Pivot Screw, Handle Screws, and Standoffs
RHK Working Finish Handle Nuts and LBS
RHK Flamed slotted clip
RHK textured titanium scale that has been satin blasted and blackened by Way of Knife
TiConnector screws for the clip and tab. They are flat-top screws that take a T8 bit.
Satin Blasted lock bar insert screw, LBS screw, clip and tab screws, and the portion of the pivot barrel visible from the lock side.
I'll be happy to send more pics or answer any questions, just shoot me a message. Thanks
More Photos: XM-18 3.0 NF Pics
Video: XM-18 3.0 NF Video
Withdrawn
No trades for now.
I'm at least the second owner of this one. I received it as LNIB in factory configuration. It's been carried a bit but there are no signs of wear that stand out against the Working Finish, with only a few faint snail trails on the flamed clip. Excellent action, centered, solid lockup with no lock stick. The pivot screw has a bit of shine around the edge of the screw head since it stands proud of the scale and gets rubbed a bit. All hardware is clean with no marring. All parts are genuine RHK except for the TiConnector clip/tab screws. Comes with all original RHK bags and boxes for the knife and hardware, tri-way bronze washer parts, Skiff Thick Washers - No nylon washers are included. Currently riding on factory bearings. Does not include original liner or G10 scale.
Add-ons and mods include:
18 DPS mirrored edge from a Wicked Edge system. The mirror finish isn't perfect anymore due to a few marks from light use but you have to look under the right lighting to see it. Edge was done very carefully with nice even bevels, and a tiny micro bevel with a 2200 grit diamond WE stone.
RHK Battle Blue Pivot Screw, Handle Screws, and Standoffs
RHK Working Finish Handle Nuts and LBS
RHK Flamed slotted clip
RHK textured titanium scale that has been satin blasted and blackened by Way of Knife
TiConnector screws for the clip and tab. They are flat-top screws that take a T8 bit.
Satin Blasted lock bar insert screw, LBS screw, clip and tab screws, and the portion of the pivot barrel visible from the lock side.
I'll be happy to send more pics or answer any questions, just shoot me a message. Thanks
More Photos: XM-18 3.0 NF Pics
Video: XM-18 3.0 NF Video
Last edited: