Tom Howard
Gold Member
- Joined
- Oct 25, 2016
- Messages
- 395
WITHDRAWN
This upper was purchased directly from Bravo Company USA as an assembled upper.
Searching for the SKU: BCM-URG-MID16-SS410-KMR13 will bring up a very similar product. The upper I am selling has the original KeyMod rail rather than the alpha model and the current model has an Ionbond Black finish. The rest of the information appears like an accurate description of the upper I am selling
Information from my email order confirmation:
BCM SS410 16" Mid Length Upper Receiver Group w/ BCM KMR 13" Handguard 1/8 Twist with BCM® Mod 0 Compensator
- Barrel: 16-inch SS410 stainless steel with a 1/8 twist rate
- Gas system: Mid-length
- Handguard: BCM KMR 13”
- Muzzle device: BCM Mod 0 Compensator
- NO Bolt carrier group or Charging handle, NONE
- Condition: Overall this upper is in very good condition and has not been fired (aside from any factory testing). It was purchased in 2015, so it has been around a while. This upper has been on an assembled rifle with a bolt carrier group and charging handle (comes with neither) installed and cycled a number of times and shows signs of that use. An optic and MBUS sights have been installed, as have various rail sections and Key Mod accessories and the rail and handguard shows various signs of this use. I tried to take a picture of any noticeable signs of use, but my pictures are not great. The receiver finish has a few small chips in the finish at the back, where the BCG, charging handle, and lower made contact, some wear where the charging handle latches, and some very light wear where the lower pins go in and in the channel where the BCG and charging handle slide. The handguard has a few marks on the “keys” where I had attached a QD mount and a chip in the finish on the bottom of the front. The chamber and rifling look good and clean. There may be other signs of use/handling, but that is all that sticks out to me.
- Accessories: The upper also comes with 2 BCM Keymod rail sections, a BCM KeyMod Quick Detachable Sling Mount, a BCM KeyMod kinesthetic angled grip, and a BCM KeyMod 1” light mount.
- Shipped to United States only. Know your local, state, and federal laws. By purchasing you assume all liability and responsibility for purchasing, owning, and using the items safely and in compliance with all applicable laws.
- Pictures - https://imgur.com/a/XHw0zD6
- If there are any questions, feel free to ask.
Thanks for looking,
Don
TERMS:
- The items, and signs of use, are described to the best of my abilities. Please note that the item is USED and may show additional signs of use that I may have failed to notice.
- Please post "I'll take it" in this thread and follow up with a PM/Conversation (or provide your contact information) for payment information. I reserve the right to sell, or not sell, to whomever I choose.
- I accept PayPal Goods and Services. The fees and shipping costs to the CONUS are included in the price. I am not interested in trades.
- Shipping will be through USPS with tracking number and insurance. I will add signature confirmation at your request. I will do my best to ship within 1-2 business days of receiving payment.
- By purchasing you assume all liability and responsibility for purchasing, owning, and using the items safely and in compliance with all applicable laws.
This upper was purchased directly from Bravo Company USA as an assembled upper.
Searching for the SKU: BCM-URG-MID16-SS410-KMR13 will bring up a very similar product. The upper I am selling has the original KeyMod rail rather than the alpha model and the current model has an Ionbond Black finish. The rest of the information appears like an accurate description of the upper I am selling
Information from my email order confirmation:
BCM SS410 16" Mid Length Upper Receiver Group w/ BCM KMR 13" Handguard 1/8 Twist with BCM® Mod 0 Compensator
- Barrel: 16-inch SS410 stainless steel with a 1/8 twist rate
- Gas system: Mid-length
- Handguard: BCM KMR 13”
- Muzzle device: BCM Mod 0 Compensator
- NO Bolt carrier group or Charging handle, NONE
- Condition: Overall this upper is in very good condition and has not been fired (aside from any factory testing). It was purchased in 2015, so it has been around a while. This upper has been on an assembled rifle with a bolt carrier group and charging handle (comes with neither) installed and cycled a number of times and shows signs of that use. An optic and MBUS sights have been installed, as have various rail sections and Key Mod accessories and the rail and handguard shows various signs of this use. I tried to take a picture of any noticeable signs of use, but my pictures are not great. The receiver finish has a few small chips in the finish at the back, where the BCG, charging handle, and lower made contact, some wear where the charging handle latches, and some very light wear where the lower pins go in and in the channel where the BCG and charging handle slide. The handguard has a few marks on the “keys” where I had attached a QD mount and a chip in the finish on the bottom of the front. The chamber and rifling look good and clean. There may be other signs of use/handling, but that is all that sticks out to me.
- Accessories: The upper also comes with 2 BCM Keymod rail sections, a BCM KeyMod Quick Detachable Sling Mount, a BCM KeyMod kinesthetic angled grip, and a BCM KeyMod 1” light mount.
- Shipped to United States only. Know your local, state, and federal laws. By purchasing you assume all liability and responsibility for purchasing, owning, and using the items safely and in compliance with all applicable laws.
- Pictures - https://imgur.com/a/XHw0zD6
- If there are any questions, feel free to ask.
Thanks for looking,
Don
TERMS:
- The items, and signs of use, are described to the best of my abilities. Please note that the item is USED and may show additional signs of use that I may have failed to notice.
- Please post "I'll take it" in this thread and follow up with a PM/Conversation (or provide your contact information) for payment information. I reserve the right to sell, or not sell, to whomever I choose.
- I accept PayPal Goods and Services. The fees and shipping costs to the CONUS are included in the price. I am not interested in trades.
- Shipping will be through USPS with tracking number and insurance. I will add signature confirmation at your request. I will do my best to ship within 1-2 business days of receiving payment.
- By purchasing you assume all liability and responsibility for purchasing, owning, and using the items safely and in compliance with all applicable laws.
Last edited: