Disclaimer:
Dear moderators,
Please let me know if I inserted\attached the images correctly. This is my first time using the Photobucket, bear with me please.
The knife blade is Wootz steel. My make; hand forged close to the final shape; ground; polished and etched to show the steel pattern.
Blade is 4" x 1"+ x 1/8"+. Tapered to the tip with flat bevels. Unfortunately my stamped mark went under the guard.
The "guard" is Nickel-Silver with a bit of engraving and my mark.
The handle is deer antler. I carved the crown a little.
The sheath is leather; hand stitched; dyed; treated with saddle oil. It has a touch of tooling by the edge.
OAL - 8-7/8".
Please be aware that this steel will rust just as 1095 or similar high carbon steel. Common sense care is required for the blade and for the handle.
SOLD
Thank you!
Dear moderators,
Please let me know if I inserted\attached the images correctly. This is my first time using the Photobucket, bear with me please.
The knife blade is Wootz steel. My make; hand forged close to the final shape; ground; polished and etched to show the steel pattern.
Blade is 4" x 1"+ x 1/8"+. Tapered to the tip with flat bevels. Unfortunately my stamped mark went under the guard.
The "guard" is Nickel-Silver with a bit of engraving and my mark.
The handle is deer antler. I carved the crown a little.
The sheath is leather; hand stitched; dyed; treated with saddle oil. It has a touch of tooling by the edge.
OAL - 8-7/8".
Please be aware that this steel will rust just as 1095 or similar high carbon steel. Common sense care is required for the blade and for the handle.
SOLD
Thank you!
Last edited:
