- Joined
- Oct 18, 2001
- Messages
- 20,978
Now that I'm back from a much needed vacation....I'm ready to hit the ground running!
Problem is....most of my knives are "out of shop" right now...
But here are some pics of what I've got "in shop"....and up an running today:
Nessmuks in 3/32" 1095 and 1/8" oversize CPM 3V
(all are heat-treated...some are orders, some available)
Bushcraft in 1/8" O1 - canceled order..available
K-TUSKs in CPM S30V (all are orders)
K-TUSK variant (order)
EDC Prototype in CPM 154
Mater in 3/32" 1095 (have a couple more at the oven)
Nessmuks in CPM 3V
Bushcraft in O1 (available, I think
)
Survivors - grinds are done enough for heat-treat, still need to radius the finger rings.
Nessmuks in 3/16" O1
(a couple are orders...the rest are available...I have more cut out than shown here)
Also in the works:
Bushcraft 2009 Production Run = 342 blades have been cut out (ouch!! $$$) and are getting ready for heat-treat
Monster Nessies - I've got 13 cut out ready to grind for heat-treat and 30 more on order - steel is on its way to be waterjet cut
WSS Forum Neck Knife - enroute to the CNC company for grinding/finishing
BushMasters - same as above...heat-treated and ready to be CNC machined.
As I think of more...I'll update them here.
I've cleared out all but about 30-40 active orders....which means I may be opening orders back up soon....probably not until after the Blade Show, though.
In all I have a little over 700 knives "in the works"....all in various phases.....so, things are kinda crazy right now!!!
If you've been waiting for an order to be completed....thanks for your patience...they will be done soon!
If you've signed up for a Production Run....fingers crossed...I am very optimistic about these being done quickly once they are "in house".
If you're wanting to get on a list for any of the above....the clock is ticking!!! (and some lists are already closed)
Hope everybody had a great Spring Break. :thumbup:
Dan
Problem is....most of my knives are "out of shop" right now...
But here are some pics of what I've got "in shop"....and up an running today:
Nessmuks in 3/32" 1095 and 1/8" oversize CPM 3V
(all are heat-treated...some are orders, some available)
Bushcraft in 1/8" O1 - canceled order..available
K-TUSKs in CPM S30V (all are orders)
K-TUSK variant (order)
EDC Prototype in CPM 154
Mater in 3/32" 1095 (have a couple more at the oven)
Nessmuks in CPM 3V
Bushcraft in O1 (available, I think
)
Survivors - grinds are done enough for heat-treat, still need to radius the finger rings.
Nessmuks in 3/16" O1
(a couple are orders...the rest are available...I have more cut out than shown here)
Also in the works:
Bushcraft 2009 Production Run = 342 blades have been cut out (ouch!! $$$) and are getting ready for heat-treat
Monster Nessies - I've got 13 cut out ready to grind for heat-treat and 30 more on order - steel is on its way to be waterjet cut
WSS Forum Neck Knife - enroute to the CNC company for grinding/finishing
BushMasters - same as above...heat-treated and ready to be CNC machined.
As I think of more...I'll update them here.
I've cleared out all but about 30-40 active orders....which means I may be opening orders back up soon....probably not until after the Blade Show, though.
In all I have a little over 700 knives "in the works"....all in various phases.....so, things are kinda crazy right now!!!
If you've been waiting for an order to be completed....thanks for your patience...they will be done soon!
If you've signed up for a Production Run....fingers crossed...I am very optimistic about these being done quickly once they are "in house".
If you're wanting to get on a list for any of the above....the clock is ticking!!! (and some lists are already closed)
Hope everybody had a great Spring Break. :thumbup:
Dan
