Wrought iron bars.

Dan Seaver

Dan Seaver

Feedback: +6 / =0 / -0
Joined
Jun 25, 2007
Messages
898
Bulk pricing is available for 5+ full size bars; contact me for details.

Currently available.
wroughtironbatch1.jpg

#1-6 from left to right.
1)1-7/16x1-5/16x3/8
$3

2)1-7/16x1-1/4x3/8
3.4oz
$3

3)1-5/16x1-3/16x3/8
$7.25

4)1-15/16x1-1/4x3/8
$3.50

5)4x1-5/16x3/8
SOLD

6)5-5/16x1-1/2x (varies 3/8-5/16)
SOLD

I accept paypal and ship via USPS. Shipping is not included in the prices.

Edit- Special pricing on the listed pieces for the next week. All other prices have been reduced also.

Batch two
wroughtironbatch2.jpg


7)1/2x1-1/2x17-1/2
$53

8)7/16x1-11/16x15
$46

9)9/16x1-5/8x14-1/2
$53

10)3/8x1-11/16x16-1/2
$42

11)11/16x1-3/4x18
$90

12)7/16x1-3/4x15-1/2
$51

Thanks
-Dan
 
Last edited:
Bump. Price reduction on everything and the hammer is running so custom size bars are available again.
 
hello, im new here--what types of stuf can i use the iron for. can i make knives out of them ( reffering to thelonger ones)--regards tony
 
Wrought iron is used for guards and other fittings on a knife. By itself its useless for a blade but can be forge welded onto a piece of high carbon steel for a unique blade. Its iron with silica slag in the metal, its no longer made on an industrial scale because smelting methods have improved resulting in much purer steel. I would estimate that the chain I'm using for the bars is about 200 years old.
 
Thanks Pike3e, do you have an email address that I can contact you at with the total cost and my papal account?
 
i sent you an email via the forum but my email is mvra(at)myfairpoint.net

thanks

John
 
Just resent the message to the new email address you provided John. :thumbup:

Edit- 5 and 6 are sold.
 
Last edited:
Forgive me if my question is dumb but what makes this stuff so expensive?
A pound of silver is about 200$ now,this iron is approaching it.
 
Scarcity I suppose, it hasn't been made on an industrial level in over 100 years. The only way you can get it is from old stashes but with the scrap boom a lot was scraped and smelted. 10 pounds of my wrought iron is $150 compared to ~$240 for one pound of silver. There are some steels being produced that even cost $50 per pound.

I consider my prices very fair since all other suppliers that I have seen charge between $20 and $40 per pound.
 
Last edited:
I forgot to order ins-tuff rigidizer for my new forge so the next person to order 2+ full bars (#7-12) gets a 25% discount! This deal is only open until Wednesday.
 
You must log in or register to reply here.
Back
Top