- Joined
- Feb 25, 2011
- Messages
- 651
Hi folks.
Ive got 5 knives and a pair of sweet Oakley shades for sale today. $129 takes all.
I have a Jim Bensinger Custom edc fixed blade in M2 High speed steel.
61/2" Overall. 3" FFG blade, around 20 inclusive with a 40 degree microbevel. This thing disappears in your pocket or around your neck, slices like a demon, and feels like an extension of your arm. Comes with excellent kydex Sheath, 550 static cord, and #2 S-biner. This will make an excellent EDC FB.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds001.jpg
Kershaw skyline:
Some light scratches. Black ZT Clip. Tight lockup. Slightly knackered box.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds003.jpg
Sarge mini trapper.
Factory edge. No side to side play in either blade. This is a sweet little slippie. Ive carried this maybe 3 days.
Blade Steel: 440C Stainless Steel
Number of Blades: 2
Rockwell Hardness: 54-58
Blade Grind: Flat
Blade Finish: Mirror Polished
Main Blade Length: 1 5/8”
Secondary Blade Length: 1 5/8”
Closed Length: 2 3/8”
Overall Length: 4 3/8”
Handle Material: Yellow delrin.
Lock Type: Slip Joint
Liners: Brass
Bolster: Nickel Silver
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds005.jpg
Mora stainless clipper.
This was my main Bushcraft blade for a about 2 years.
The edge has been ground down a bit. When i used this knife i worked at a place where almost everybody had one of these clippers so i wrapped the sheath in blue hockey tape and scratched an "A" into the sheath to distinguish mine from the others. Make no mistake, this is no sa
fe queen but there is plenty of life left in this knife.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds002.jpg
Tops C.A.T. 200.
I stripped the coating from the blade. For $5, TOPS will recoat the blade if you send it in. reground the edge to around 20 inclusive with a hair popping 40 degree micro bevel. I filed down the jimping on the spine as it came a little to sharp from the factory. There is still plenty of traction for your thumb. This knife has flawless ergos. It has proven to me many times that it can take a capitol B Beating and come out asking for more. This is truly one of the greatest unsung production FB's.
The Kydex is by far the finest i've seen on a factory knife.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds006.jpg
Last but not least is a pair of Livestrong edition Oakley Radars.
The Lense has a few light scratches that i cant see when i'm wearing the glasses. There is a small patch, perhaps 5/8"x 1/8" above the nosepeice on the inside of the frame. It cant be seen when the glasses are being worn. I only noticed it about 30 minutes ago, and ive had the sunglasses for around a year (Ive worn them maybe 5 or 6 days). There is around 1/16" of lense missing form the left tab that secures the lense in the frame. Even still, the lense stays in the frame fine and it can only be seen when the lenses are being switched. Ill get some macro pics up in a few minutes. I forget im wearing these shades when there on and the black iridium lense really brings out the color in the landscape. They don't come much better than this.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds004.jpg
First "Ill take it" here gets them all.
Group shot.
I will ship To the CONUS via USPS with delivery confirmation.
Paypal is preferred.
I reserve the right to choose who i sell to.
No trades at this time please.
And thats all.
Ive got 5 knives and a pair of sweet Oakley shades for sale today. $129 takes all.
I have a Jim Bensinger Custom edc fixed blade in M2 High speed steel.
61/2" Overall. 3" FFG blade, around 20 inclusive with a 40 degree microbevel. This thing disappears in your pocket or around your neck, slices like a demon, and feels like an extension of your arm. Comes with excellent kydex Sheath, 550 static cord, and #2 S-biner. This will make an excellent EDC FB.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds001.jpg
Kershaw skyline:
Some light scratches. Black ZT Clip. Tight lockup. Slightly knackered box.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds003.jpg
Sarge mini trapper.
Factory edge. No side to side play in either blade. This is a sweet little slippie. Ive carried this maybe 3 days.
Blade Steel: 440C Stainless Steel
Number of Blades: 2
Rockwell Hardness: 54-58
Blade Grind: Flat
Blade Finish: Mirror Polished
Main Blade Length: 1 5/8”
Secondary Blade Length: 1 5/8”
Closed Length: 2 3/8”
Overall Length: 4 3/8”
Handle Material: Yellow delrin.
Lock Type: Slip Joint
Liners: Brass
Bolster: Nickel Silver
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds005.jpg
Mora stainless clipper.
This was my main Bushcraft blade for a about 2 years.
The edge has been ground down a bit. When i used this knife i worked at a place where almost everybody had one of these clippers so i wrapped the sheath in blue hockey tape and scratched an "A" into the sheath to distinguish mine from the others. Make no mistake, this is no sa
fe queen but there is plenty of life left in this knife.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds002.jpg
Tops C.A.T. 200.
I stripped the coating from the blade. For $5, TOPS will recoat the blade if you send it in. reground the edge to around 20 inclusive with a hair popping 40 degree micro bevel. I filed down the jimping on the spine as it came a little to sharp from the factory. There is still plenty of traction for your thumb. This knife has flawless ergos. It has proven to me many times that it can take a capitol B Beating and come out asking for more. This is truly one of the greatest unsung production FB's.
The Kydex is by far the finest i've seen on a factory knife.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds006.jpg
Last but not least is a pair of Livestrong edition Oakley Radars.
The Lense has a few light scratches that i cant see when i'm wearing the glasses. There is a small patch, perhaps 5/8"x 1/8" above the nosepeice on the inside of the frame. It cant be seen when the glasses are being worn. I only noticed it about 30 minutes ago, and ive had the sunglasses for around a year (Ive worn them maybe 5 or 6 days). There is around 1/16" of lense missing form the left tab that secures the lense in the frame. Even still, the lense stays in the frame fine and it can only be seen when the lenses are being switched. Ill get some macro pics up in a few minutes. I forget im wearing these shades when there on and the black iridium lense really brings out the color in the landscape. They don't come much better than this.
http://s1217.photobucket.com/albums...dinb114/?action=view¤t=khukfunds004.jpg
First "Ill take it" here gets them all.
Group shot.
I will ship To the CONUS via USPS with delivery confirmation.
Paypal is preferred.
I reserve the right to choose who i sell to.
No trades at this time please.
And thats all.
