- Joined
- Oct 27, 2010
- Messages
- 8,721
I have a 2003 Orbea Box1 DH frame size Medium with a Marzocchi Z1 Freeride1 (~160mm iirc?) fork I am looking to trade.
I rode this frame once on an "urban" ride, no mud or rocks. I stripped it down to build an "urban assault" bike and it has been in storage since. I bought it in 2005 as a used DEMO bike from a shop, and basically it only had test rides in the parking lot for part of one season. Only wear is from storage, maybe 3 small paint chips and I couldn't remember where all of them were. The fork I bought new for this bike and it was ridden in another frame maybe 3 times, no leaks, no scratches in upper tubes, functions perfect. Steer tube was left long because my other frame had a very tall head tube and I didn't want to cut it "just in case" another frame came along. It is a 20mm thru-axle with Int'l disc brake mounts. One small paint rub from cable housing on crown. Frame has Cane Creek integrated Aheadset, stem is just a junker i had to keep it mounted. FULL LENGTH uncut Thompson 0* offset seatpost is included, bike was not ridden that way, seat post is shimmed to 27.2mm. Orbea logo'd road saddle (made by Selle Italia) makes a great DH race saddle. Fox Vanilla RC coil over rear shock, great progressive feel to it, great for heavier riders, too. (165lbs+) 4 bar link rear end with sealed bearings at all pivots. Adjustable rear geometry to boot. This is the same model frame that 2003 Spanish DH champion Chus Castillano rode to the championship. It is modeled after the famed Intense M1 DH bike. With good components it can be built up under 38lbs.
I am looking for a 2X72 grinder or possibly a reversible disc grinder. Other large shop tools will be considered, but a 2x72 is my main objective. I would like a 3 or 4 wheel grinder, so please no grizzly's. I have bins full of parts as well, for road, track, mountain, so if there is something else you are looking for feel free to email me.
North America only please! If you have any specific questions, feel free to email me. fast14riot@comcast.net
-Xander
I rode this frame once on an "urban" ride, no mud or rocks. I stripped it down to build an "urban assault" bike and it has been in storage since. I bought it in 2005 as a used DEMO bike from a shop, and basically it only had test rides in the parking lot for part of one season. Only wear is from storage, maybe 3 small paint chips and I couldn't remember where all of them were. The fork I bought new for this bike and it was ridden in another frame maybe 3 times, no leaks, no scratches in upper tubes, functions perfect. Steer tube was left long because my other frame had a very tall head tube and I didn't want to cut it "just in case" another frame came along. It is a 20mm thru-axle with Int'l disc brake mounts. One small paint rub from cable housing on crown. Frame has Cane Creek integrated Aheadset, stem is just a junker i had to keep it mounted. FULL LENGTH uncut Thompson 0* offset seatpost is included, bike was not ridden that way, seat post is shimmed to 27.2mm. Orbea logo'd road saddle (made by Selle Italia) makes a great DH race saddle. Fox Vanilla RC coil over rear shock, great progressive feel to it, great for heavier riders, too. (165lbs+) 4 bar link rear end with sealed bearings at all pivots. Adjustable rear geometry to boot. This is the same model frame that 2003 Spanish DH champion Chus Castillano rode to the championship. It is modeled after the famed Intense M1 DH bike. With good components it can be built up under 38lbs.
I am looking for a 2X72 grinder or possibly a reversible disc grinder. Other large shop tools will be considered, but a 2x72 is my main objective. I would like a 3 or 4 wheel grinder, so please no grizzly's. I have bins full of parts as well, for road, track, mountain, so if there is something else you are looking for feel free to email me.
North America only please! If you have any specific questions, feel free to email me. fast14riot@comcast.net
-Xander