FOR TRADE...
TRADED...Emerson Commander SFS w/ box . Date code is 2005 on this one. Being it's a '05, it's got the thinner locking liner, but the non locking side is also Ti vs. steel on the newer models. It was carried briefly, never saw use save for opening some letters, still has factory edge. Fit and finish on this one is better then my other Emerson, blade centering is only slightly off, lock-up is about 40-50%. Only sign of carry is some small marks on the clip (picture actually shows them more then they're noticeable in normal light). Lock is a little sticky (like with most Emersons). Comes with a plastic trainer I made.
Top one is the Commander
Commander is on the right.
Trainer with Commander.
Cold Steel Recon 1 w/ Ultra-lock. When I first got it, I worked the action open and close to break it in (like you have to with most CS knives), it's now nice and smooth with still SOLID lockup. I also lightly sanded the G10 under the pocket clip to make it more pants friendly. The knife was carried maybe a dozen time and never saw any use other then mail opening. It has the factory edge and all of the Teflon coating intact. I'd call it like LNIB but due to the mod and lack of box we'll call it Very Good condition.
Keshaw Blackout 80th Anniversary Snap-on Edition. This knife has been carried and used, though in good shape. The lock bar has travel to 100%, still locks up fairly solid, I haven't sent it in because Kershaw would just replace the knife and I'd loose the special edition (they can't salvage the blade due to the type of construction). Would make a nice addition to the collection for Kershaw/Snap-on collectors.
Cold Steel Rajah III w/ box and extra clip. I carried this one for maybe a month. It's been slightly modded; the spine has been dropped and rounded slightly, the thumb plate's back corners rounded off, and the bead blast finished has been partially buffed off leaving a matte finish that doesn't seem to rust as easily (back lock also has been buffed). I also work the Tri-ad lock open and close I don't know how many time; the result is the smoothest Tri-ad I've felt and ROCK SOLID lock-up. It's currently set for right hand reverse grip draw (the short 550 lanyard assist with the draw) as I carried it primarily for SD. As such it hasn't seen much cutting at all, still has the factory razor edge.
Discontinued Kershaw Sapphire w/ original box. This knife was carried briefly back when I got it (off and on for maybe a month), it's still has the factory edge. I recently modded the knife, removing the factory anodizing on the scales and flaming them; there are a few small blemishes in the flaming on the non-locking side as seen in the pics (around the lower 2 screws). The liners, pocket clip, and blade were polished and everything was meticulously put back together. Early lock-up, blade centering almost perfect (the pic is a little deceiving as the non locking side is only a partial liner). Would make a great gentleman's knife and conversation piece
Leatherman Skeletool, was carried a maybe a dozen times (bottle opener saw more use then anything), in like new condition, comes with box and papers.
Tool Logic folder w/ Firesteel (not sure of specific model name). This knife hasn't been carried, never cut anything, and has only had a few strikes of the fire steel; it's like new. Would make a get knife for lightweight hikers. Knife came in a clam-shell, as such no box.
Looking primarily for NIB or LNIB Emerson's w/ plain edge, WSK styled knives, or pretty much anything ZT (already have a 0350 and 0200)... If you have something else feel free to post or message me. Like to keep this CONUS.
Thanks for looking:thumbup:
-sh00ter
TRADED...Emerson Commander SFS w/ box . Date code is 2005 on this one. Being it's a '05, it's got the thinner locking liner, but the non locking side is also Ti vs. steel on the newer models. It was carried briefly, never saw use save for opening some letters, still has factory edge. Fit and finish on this one is better then my other Emerson, blade centering is only slightly off, lock-up is about 40-50%. Only sign of carry is some small marks on the clip (picture actually shows them more then they're noticeable in normal light). Lock is a little sticky (like with most Emersons). Comes with a plastic trainer I made.
Top one is the Commander
Commander is on the right.
Trainer with Commander.
Cold Steel Recon 1 w/ Ultra-lock. When I first got it, I worked the action open and close to break it in (like you have to with most CS knives), it's now nice and smooth with still SOLID lockup. I also lightly sanded the G10 under the pocket clip to make it more pants friendly. The knife was carried maybe a dozen time and never saw any use other then mail opening. It has the factory edge and all of the Teflon coating intact. I'd call it like LNIB but due to the mod and lack of box we'll call it Very Good condition.
Keshaw Blackout 80th Anniversary Snap-on Edition. This knife has been carried and used, though in good shape. The lock bar has travel to 100%, still locks up fairly solid, I haven't sent it in because Kershaw would just replace the knife and I'd loose the special edition (they can't salvage the blade due to the type of construction). Would make a nice addition to the collection for Kershaw/Snap-on collectors.
Cold Steel Rajah III w/ box and extra clip. I carried this one for maybe a month. It's been slightly modded; the spine has been dropped and rounded slightly, the thumb plate's back corners rounded off, and the bead blast finished has been partially buffed off leaving a matte finish that doesn't seem to rust as easily (back lock also has been buffed). I also work the Tri-ad lock open and close I don't know how many time; the result is the smoothest Tri-ad I've felt and ROCK SOLID lock-up. It's currently set for right hand reverse grip draw (the short 550 lanyard assist with the draw) as I carried it primarily for SD. As such it hasn't seen much cutting at all, still has the factory razor edge.
Discontinued Kershaw Sapphire w/ original box. This knife was carried briefly back when I got it (off and on for maybe a month), it's still has the factory edge. I recently modded the knife, removing the factory anodizing on the scales and flaming them; there are a few small blemishes in the flaming on the non-locking side as seen in the pics (around the lower 2 screws). The liners, pocket clip, and blade were polished and everything was meticulously put back together. Early lock-up, blade centering almost perfect (the pic is a little deceiving as the non locking side is only a partial liner). Would make a great gentleman's knife and conversation piece
Leatherman Skeletool, was carried a maybe a dozen times (bottle opener saw more use then anything), in like new condition, comes with box and papers.
Tool Logic folder w/ Firesteel (not sure of specific model name). This knife hasn't been carried, never cut anything, and has only had a few strikes of the fire steel; it's like new. Would make a get knife for lightweight hikers. Knife came in a clam-shell, as such no box.
Looking primarily for NIB or LNIB Emerson's w/ plain edge, WSK styled knives, or pretty much anything ZT (already have a 0350 and 0200)... If you have something else feel free to post or message me. Like to keep this CONUS.
Thanks for looking:thumbup:
-sh00ter
Last edited:
