OK, taking this thread in a different direction AGAIN until I can repost it later. This is a crazy good offer I'm making here. I want either a Strider AR or SMF.
AR's are a little more rare so I'm willing to work with you on condition. But an SMF needs to be a nice one with good centering and lock-up... and not all beat up. As close to new as possible. There is a lot of value in what I'm offering. I want to get a lot of value in return. I prefer tiger stripe finish but will entertain others. I prefer S35V but I know most out there are S30V so I'm not gonna be picky there. In an SMF I would so love to get an Aluminum Scaled one. As far as color... I prefer black or green... but again... willing to entertain others. (Even a pink one should there be such a thing). Willing to trade both of these knives here...
1. Got an unused factory edge Gen1 (Non see through, brighter glowing material) Moonglow Manix 2. Blade is centered and lock up is bullet proof.
PICS
2.Got a good condition BATAC here. Black G-10. It's had it's coating stripped and a semi hand rub finish on the main bevel. Has a bead blasted type treatment to the blade. The steel had scratches and marks under the coating but they were there when the blade was coated at Busse. It hasn't really seen much action. I've carried it around in my bag for a few months. The most substantial thing it's cut is I used it to strip some bark off of some pine logs. Other than that it's been just a bag knife. Put a nice convex edge on it by hand with my JRE EMS system. It's very sharp.
PICS
AR's are a little more rare so I'm willing to work with you on condition. But an SMF needs to be a nice one with good centering and lock-up... and not all beat up. As close to new as possible. There is a lot of value in what I'm offering. I want to get a lot of value in return. I prefer tiger stripe finish but will entertain others. I prefer S35V but I know most out there are S30V so I'm not gonna be picky there. In an SMF I would so love to get an Aluminum Scaled one. As far as color... I prefer black or green... but again... willing to entertain others. (Even a pink one should there be such a thing). Willing to trade both of these knives here...
1. Got an unused factory edge Gen1 (Non see through, brighter glowing material) Moonglow Manix 2. Blade is centered and lock up is bullet proof.
PICS
2.Got a good condition BATAC here. Black G-10. It's had it's coating stripped and a semi hand rub finish on the main bevel. Has a bead blasted type treatment to the blade. The steel had scratches and marks under the coating but they were there when the blade was coated at Busse. It hasn't really seen much action. I've carried it around in my bag for a few months. The most substantial thing it's cut is I used it to strip some bark off of some pine logs. Other than that it's been just a bag knife. Put a nice convex edge on it by hand with my JRE EMS system. It's very sharp.
PICS
Last edited: