I have a handcrafted folding knife. Really open to all offers.... And you can reach me at edcgear(AT)gmail(DOT)com
1. Blade Steel - L6 tool steel
C 0.70 %
Cr 0.70
Fe 96.35 %
Mn 0.60 %
Ni 1.40 %
Si 0.25 %
ATML6 or TLS L6 tool steel is suitable for use as tools, dies, and machine parts which require a good combination of hardness and toughness. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. Typical applications for TLS L6 tool steel include punches and dies, cold forming tools, and coining dies.
2. Liners - Brass
3. Scales - linen oil and wax treated walnoot root
4. Brass bolster
- Unique back lock with brass ring
13cm closed
9,5cm blade
8,5cm cutting edge (this is straight line point to ricasso, so cutting edge is more)
The blade is full convex grinded and razor sharp.
This is really a beutifull knife with high potential!! It has it's imperfections, but I'll emphasis the FULL MANUAL CRAFTING of this knife, hence the imperfections...
Pics
1. Blade Steel - L6 tool steel
C 0.70 %
Cr 0.70
Fe 96.35 %
Mn 0.60 %
Ni 1.40 %
Si 0.25 %
ATML6 or TLS L6 tool steel is suitable for use as tools, dies, and machine parts which require a good combination of hardness and toughness. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. Typical applications for TLS L6 tool steel include punches and dies, cold forming tools, and coining dies.
2. Liners - Brass
3. Scales - linen oil and wax treated walnoot root
4. Brass bolster
- Unique back lock with brass ring
13cm closed
9,5cm blade
8,5cm cutting edge (this is straight line point to ricasso, so cutting edge is more)
The blade is full convex grinded and razor sharp.
This is really a beutifull knife with high potential!! It has it's imperfections, but I'll emphasis the FULL MANUAL CRAFTING of this knife, hence the imperfections...
Pics