Items I have for trade:
1. Kershaw Dividend 440c. Bought this used from a forum member. Carried and flipped this a bunch but cut very little. Great knife but I am getting out of assisted openers. Sharpened by a previous owner at what looks like a 40 degree inclusive edge (didn't measure). One side was taken down more than the other. Currently printer paper sharp (barely). Centering favors the non-clip side ever so slightly with plenty of clearance. Several chips in the paint on the clip. No box.
2. Gone Kershaw Dividend M390. Bought this new a while back. Opened it to take a look and put it away for later. Took it out again for pics. Sadly somewhere in the 10 minutes I had it out I managed to chip the paint on the tip of the clip as can be seen in the photo. Never carried or used. Comes with original box.
3. Gone Spyderco Manix s110v G10. Bought this used from a forum member recently. See their sale thread here with additional pics: https://www.bladeforums.com/threads/spyderco-manix-2-s110v.1533567/#post-17612896.
I carried it for a day and tested it on a piece of paper. It's just not for me. The edge has been touched up by a previous owner and currently has a slight, smoothed out secondary bevel that makes it look like they were going for a convex edge. It is printer paper sharp. No box.
I am looking for the following items in trade. Money can be added to either side of the deal via PayPal if needed. I am always happy to entertain other offers. Flat grinds and plain edges preferred where applicable. Open to various scale colors, but please no blade coatings, or assisted openers. I'm more interested in the quality of the steel than the handle material. I realize I only have a few positive reviews as a buyer here, but I have a lot more at gunbroker.com and ar15.com under the same username if you care to look.
-Domino in CTS-204p (or a Domino scale in anything other then the original Cosby sweater pattern that I have now)
-Native 5 - s35vn or s110v preferred
-Sharpmaker (preferably with diamond stones)
-Dragonfly (Idealy in ZDP-189)
-ZT0450
-Buck 112
-Buck 113 Ranger or similar small fixed blade
-Kershaw Random Leek
1. Kershaw Dividend 440c. Bought this used from a forum member. Carried and flipped this a bunch but cut very little. Great knife but I am getting out of assisted openers. Sharpened by a previous owner at what looks like a 40 degree inclusive edge (didn't measure). One side was taken down more than the other. Currently printer paper sharp (barely). Centering favors the non-clip side ever so slightly with plenty of clearance. Several chips in the paint on the clip. No box.
2. Gone Kershaw Dividend M390. Bought this new a while back. Opened it to take a look and put it away for later. Took it out again for pics. Sadly somewhere in the 10 minutes I had it out I managed to chip the paint on the tip of the clip as can be seen in the photo. Never carried or used. Comes with original box.
3. Gone Spyderco Manix s110v G10. Bought this used from a forum member recently. See their sale thread here with additional pics: https://www.bladeforums.com/threads/spyderco-manix-2-s110v.1533567/#post-17612896.
I carried it for a day and tested it on a piece of paper. It's just not for me. The edge has been touched up by a previous owner and currently has a slight, smoothed out secondary bevel that makes it look like they were going for a convex edge. It is printer paper sharp. No box.
I am looking for the following items in trade. Money can be added to either side of the deal via PayPal if needed. I am always happy to entertain other offers. Flat grinds and plain edges preferred where applicable. Open to various scale colors, but please no blade coatings, or assisted openers. I'm more interested in the quality of the steel than the handle material. I realize I only have a few positive reviews as a buyer here, but I have a lot more at gunbroker.com and ar15.com under the same username if you care to look.
-Domino in CTS-204p (or a Domino scale in anything other then the original Cosby sweater pattern that I have now)
-Native 5 - s35vn or s110v preferred
-Sharpmaker (preferably with diamond stones)
-Dragonfly (Idealy in ZDP-189)
-ZT0450
-Buck 112
-Buck 113 Ranger or similar small fixed blade
-Kershaw Random Leek
Last edited:
