Contact me at bladehog@hotmail.com
I'm trying to consolidate all the stuff I have for trade into one thread. So this will be kind of a mushed together list. Also note that I have gear for trade here... http://www.bladeforums.com/forums/showthread.php/917971-Couple-of-nice-Maxpedition-Bags
For some reason in my mind I'm after a beefy folder. I am mainly looking for a Strider AR Framelock, Strider AR, Strider SMF with aluminum scale, or Regular Regular SMF, Three Sisters Forge Super Beast with textured handles, and perhaps crusader forge. Will also consider ZT 301, Severtech Spartan without serrations, Beefy Balisongs, and the like. You get the idea... large chunky tank like folders. Would be interested in Some Busse Fixed blades (Would love a police Recruit), I like custom bush knives similar to Kephart Patterns, and I'm always interested in Anti-Zombie weapons like swords and such.
I am also interested in firearms. Top of my list is a Glock 19 (preferably Gen 2 without finger grooves), S&W 629 with 4" or shorter barrel, S&W 460 with 4" or shorter barrel (Cause they're loud), Desert Eagle 50AE, Kahr PM380, And I dig AR goodness from Colt, RRA, Armalite, and MEGA.
I am also into Guitars. But I don't really have enough here to get a guitar I'm interested... but if you have a Taylor or Gibson acoustic laying around or a Gibson, Fender, or Jackson Electric... give me a shout. Would trade everything for a Marshall JCM 800 100 head.
1. Got an unused factory edge Gen1 (Non see through, brighter glowing material) Moonglow Manix 2. Blade is centered and lock up is bullet proof.
PICS
2.Got a good condition BATAC here. Black G-10. It's had it's coating stripped and a semi hand rub finish on the main bevel. Has a bead blasted type treatment to the blade. The steel had scratches and marks under the coating but they were there when the blade was coated at Busse. It hasn't really seen much action. I've carried it around in my bag for a few months. The most substantial thing it's cut is I used it to strip some bark off of some pine logs. Other than that it's been just a bag knife. Put a nice convex edge on it by hand with my JRE EMS system. It's very sharp.
PICS
3. David Mosier Recurve. According to Mr. Mosier he only made 2 of these. One was satin finished and this one was hand rubbed. He also said he'd never hand rub a blade this large again as it was FAR too labor intensive. So I consider this one to be the more desirable finish of the two as it was done by hand. It's about 3/16ths thick with around a 12" blade and is lightening fast. Not so sure it would make a good batoning knife... but it would make one hell of a head remover simply because it moves so quick, is well balanced for a knife it's size, and is razor sharp. It's made of CPM S30V and is an amazing piece. It's the only one like it anywhere. Nice Kydex sheath too. Unused, has some kydex marks but other than that... it's a safe queen. Has file work on the butt which I thought was cool... make a nasty impact weapon on the bottom. The lanyard in the pic is gone.
PICS
I'm trying to consolidate all the stuff I have for trade into one thread. So this will be kind of a mushed together list. Also note that I have gear for trade here... http://www.bladeforums.com/forums/showthread.php/917971-Couple-of-nice-Maxpedition-Bags
For some reason in my mind I'm after a beefy folder. I am mainly looking for a Strider AR Framelock, Strider AR, Strider SMF with aluminum scale, or Regular Regular SMF, Three Sisters Forge Super Beast with textured handles, and perhaps crusader forge. Will also consider ZT 301, Severtech Spartan without serrations, Beefy Balisongs, and the like. You get the idea... large chunky tank like folders. Would be interested in Some Busse Fixed blades (Would love a police Recruit), I like custom bush knives similar to Kephart Patterns, and I'm always interested in Anti-Zombie weapons like swords and such.
I am also interested in firearms. Top of my list is a Glock 19 (preferably Gen 2 without finger grooves), S&W 629 with 4" or shorter barrel, S&W 460 with 4" or shorter barrel (Cause they're loud), Desert Eagle 50AE, Kahr PM380, And I dig AR goodness from Colt, RRA, Armalite, and MEGA.
I am also into Guitars. But I don't really have enough here to get a guitar I'm interested... but if you have a Taylor or Gibson acoustic laying around or a Gibson, Fender, or Jackson Electric... give me a shout. Would trade everything for a Marshall JCM 800 100 head.
1. Got an unused factory edge Gen1 (Non see through, brighter glowing material) Moonglow Manix 2. Blade is centered and lock up is bullet proof.
PICS
2.Got a good condition BATAC here. Black G-10. It's had it's coating stripped and a semi hand rub finish on the main bevel. Has a bead blasted type treatment to the blade. The steel had scratches and marks under the coating but they were there when the blade was coated at Busse. It hasn't really seen much action. I've carried it around in my bag for a few months. The most substantial thing it's cut is I used it to strip some bark off of some pine logs. Other than that it's been just a bag knife. Put a nice convex edge on it by hand with my JRE EMS system. It's very sharp.
PICS
3. David Mosier Recurve. According to Mr. Mosier he only made 2 of these. One was satin finished and this one was hand rubbed. He also said he'd never hand rub a blade this large again as it was FAR too labor intensive. So I consider this one to be the more desirable finish of the two as it was done by hand. It's about 3/16ths thick with around a 12" blade and is lightening fast. Not so sure it would make a good batoning knife... but it would make one hell of a head remover simply because it moves so quick, is well balanced for a knife it's size, and is razor sharp. It's made of CPM S30V and is an amazing piece. It's the only one like it anywhere. Nice Kydex sheath too. Unused, has some kydex marks but other than that... it's a safe queen. Has file work on the butt which I thought was cool... make a nasty impact weapon on the bottom. The lanyard in the pic is gone.
PICS
