- Joined
- Jan 22, 2019
- Messages
- 163
Jon Graham custom GT multi-grind tanto
https://imgur.com/a/uhhWsdM
[Jons insta post- action video](https://www.instagram.com/p/BUujxC8DgyA/?igshid=6vfg5i4nw80i)
This was my first custom and has treated me well. Super snappy action, 3in 154cm blade, fantastic milling, and the signature graham tail clip. I’ve carried this one quite a bit but it hasn’t seen any love in the past couple months. I believe one of the previous owner have sharpend it, and the tip could use a touch up. Centering favors show side too. I’ve reached out to Jon who said he could fix it, but due to his ongoing battle with cancer the turn around time is unpredictable. Other Knives in this album are NFS or have been sold.
**Richard Rogers custom sharpy
[Timestamp, size comparison, video, and pics](https://imgur.com/a/W6X2WsC)
This is a neat little gentleman’s friction folder, very slim and light weight. There’s a pic comparing it’s size to a sharpie marker, Parker jotter, and G2 pen. I’ve been after this awhile and was fortunate enough to pick this up along with a few other Rogers of similar profile, but I find I carry those over this sharpy.
I’m not the original owner. The previous owner picked it up on recon 1 and almost immediately flipped it to me. Knife was originally sold as “pre-owned - mint with no flaws” which looks to be accurate.I have not used or carried this, just played with and took some pics.
Knife DOES NOT COME WITH COA, but says “Rogers” on the blade. I may have the recon 1 receipt, but would need to double check. It does come with a tube like case.
Specs from recon 1
https://imgur.com/a/VfszkCt
Knife has a some wear on the ano/Ti, and on the clip. It’s nothing a trip to Rogers spa couldn’t fix. Detents on the lighter end. Amazing action, fires out and drops shut very nicely. Centered and I don’t feel play in any direction. Comes with CoA.
open to whatever but not really into production knives unless trade heavily in my favor. Open to trade + cash, or trading 2 or all of these up.
Interests include but not at all limited to:
https://imgur.com/a/uhhWsdM
[Jons insta post- action video](https://www.instagram.com/p/BUujxC8DgyA/?igshid=6vfg5i4nw80i)
This was my first custom and has treated me well. Super snappy action, 3in 154cm blade, fantastic milling, and the signature graham tail clip. I’ve carried this one quite a bit but it hasn’t seen any love in the past couple months. I believe one of the previous owner have sharpend it, and the tip could use a touch up. Centering favors show side too. I’ve reached out to Jon who said he could fix it, but due to his ongoing battle with cancer the turn around time is unpredictable. Other Knives in this album are NFS or have been sold.
**Richard Rogers custom sharpy
[Timestamp, size comparison, video, and pics](https://imgur.com/a/W6X2WsC)
This is a neat little gentleman’s friction folder, very slim and light weight. There’s a pic comparing it’s size to a sharpie marker, Parker jotter, and G2 pen. I’ve been after this awhile and was fortunate enough to pick this up along with a few other Rogers of similar profile, but I find I carry those over this sharpy.
I’m not the original owner. The previous owner picked it up on recon 1 and almost immediately flipped it to me. Knife was originally sold as “pre-owned - mint with no flaws” which looks to be accurate.I have not used or carried this, just played with and took some pics.
Knife DOES NOT COME WITH COA, but says “Rogers” on the blade. I may have the recon 1 receipt, but would need to double check. It does come with a tube like case.
Specs from recon 1
- 3.625″ ceramic bead-blasted CPM-154 wharncliffe blade
- 3.375″ cutting edge
- 9.0″ overall length
- Runs on Teflon washers
- Weighs 1.5 ounces
- Beveled and polished carbon fiber handle scales
- Titanium liners with polished edges
- Polished hardware
- Ceramic bead-blasted backspacer
- Titanium pommel with ceramic bead-blast and polished edges and end
- Ceramic bead-blasted tip-down Titanium pocket clip with polished edges
- One of the Titanium liners features a spring tension bar with detent ball that allows the knife to function like a slipjoint
- Easily able to be opened and closed one-handed with the friction folder-like blade tang tab
https://imgur.com/a/VfszkCt
Knife has a some wear on the ano/Ti, and on the clip. It’s nothing a trip to Rogers spa couldn’t fix. Detents on the lighter end. Amazing action, fires out and drops shut very nicely. Centered and I don’t feel play in any direction. Comes with CoA.
open to whatever but not really into production knives unless trade heavily in my favor. Open to trade + cash, or trading 2 or all of these up.
Interests include but not at all limited to:
- anything Rogers.
- Eutsler Duk
- newer JG scout and rover
- Holt specter (preferably purple or blue)
- wee razel
- GG hawk orbit
- Rassenti customs
- Gavko nurse
- Edc pocket organizer.
- TBC EXK/LEXK
- Seiko or omega watch
- Custom para cord beads.
- Graham WOP tool
- Hinderer Gen 6 XM18 3.5in spanto in 20cv or m390
