WTT: Strider Folders, DDR GunHammer EDC-X, CRK Sable IV

Status
Not open for further replies.
OilMan

OilMan

Gold Member
Feedback: +87 / =0 / -0
Joined
May 6, 2004
Messages
4,291
Some of this stuff is for sale on different forums but trades are just as good.

MSC SnG Recurve w/RG handle and Screen Print Blade Finnish - Dead Mint - Sold

Strider_MSC_SnG_RG_NM_Gen6_.gif



DDC SnG Chisel Ground Drop Point w/CB handle w/US Flag in the handle - It just got back from the Spa and it's immaculate. Comes with a Cool Strider Tan Bag.

Strider_DDC_SnG_ChslDrp_01.gif


Strider_DDC_SnG_ChslDrp_02b.jpg


Strider_DDC_SnG_ChslDrp_12.gif


Strider Numbered SMF Tanto - Number 75, It's been sharpened nicely on my SM and it's sharp as heck. I'll post pics of it when I get home tonight.


DDR GunHammer EDC-X Assisted w/ Tritium insert in back of handle (Although it's not a Radion model.) Sharpened on my SM nicely but there are light 1mm scratches about 1mm from the tip where I leaned into my course stone just a little too much. You have to hold it at the right angle to see them. I'll try to get pics of the scratches tonight but I'm not sure if they will show up. Taken Pending Acceptance

DDR_GH_EDCX_04.gif


DDR_GH_EDCX_06.gif


DDR_GH_EDCX_10.gif



CRK Sable IV - Sharpened with one almost scratch running spine to edge where I came down on my SM rods wrong. It doesn't go all the way through the Gunkote though. Comes with stock leather sheath. I'll get pics when I get home tonight. Traded Pending Acceptance

Stuff I'm looking for: Busse BME or SHBM, Busse FSH or SH2, Busse AD Sheath(Kydex or leather), Busse BATAC sheath(Kydex or leather) The Kershaw on the cover of this months Blade magazine, Busse Hell Razor with MAG handles and sheath, One of the larger Swamp Rats maybe, Satin Drop Point Flipper Hinderer XM, Lightfoot Flippers, Spyderco/Hossom FBs, bigger Dozier FBs, Fehrman NonTanto FBs, SOG Powerlocks and Leatherman Multis, TactiCool folders... And I'm a picky be-otch so please don't be offended if I pass on some trades. Users are ok with the Busses (I'm gonna use them) but please value them accordingly.


thanks,

oil

You can PM me here or shoot me an email to Bladeforums At Mckean Dot Com
 
Update: The CB DDC SnG just got back from the spa and it immaculate.

Here's pics of the Strider Tanto SMF:

That's paper towel in the handle.:)
StriderNmbrdTnto075_1.gif


StriderNmbrdTnto075_2.gif


StriderNmbrdTnto075_3.gif


StriderNmbrdTnto075_4.gif


StriderNmbrdTnto075_5.gif



Going to try and get a pic of the small marks on the DDR GH now.

Thanks,

Greg
 
And here's another Strider DDC for your consideration. It's a One of a kind Dwyer SnG, although there's a SMF one too floating around, Chisel Ground Shroud Cutter based on a Gen 5 frame. (For parachutists and others to cut cords and such) I've had it twice now but this time I started 'fixing' the forward grind. By fixing it I mean about an 1/8" of the forward grind was completely flat/unground. So, me being me, I started grinding away with my Edgepro off and on for about a week and now have that spot down to about 1mm and the rest is a 0 edge and very sharp. The rest of the blade is immaculate and it locks up like a tank. You probably can't tell from the pics but it's got an OD Green handle.

DDC_ShroudCutter_20.gif


DDC_ShroudCutter_22.gif


DDC_ShroudCutter_25.gif


DDC_ShroudCutter_26.gif
 
Did you get my email? I replied a couple of hours ago. If not shoot me an email to bladeforums at mckean dot com and I'll get back to you again.

thanks,

Greg
 
All PMs replied to and the Coyote Brown DDC is available again.

thanks,

Greg
 
CRK Sable is Traded Pending Acceptance

Still some great stuff left.

Thanks,

greg
 
Status
Not open for further replies.
Back
Top