We 804F: had a chip near tip of blade that i sharpened out, not perfect but didn't bother me.
Bought used, Carried some, opened boxes. Doesn't show much wear.
It's been taken apart, cleaned, oiled. Stronger detent and fires hard. Solid lockup.
https://imgur.com/ZwduW10
https://imgur.com/a/MhGAiEr
ADV Scavenger
https://imgur.com/HGkOBDO
[/URL]
[/URL]
Knife was disassembled, re oiled and removed tiny bur inside the milled area on the blade where the really nice semi sealed pivot cups and dual row bearings ride. There is also a tiny area behind the lock bar that wasn't rounded so i started to with a ceramic stone but stopped. Something hard to notice unless you look hard.
Really nice action, detent on the stronger side but can still be flicked. Nice sound on opening and closing.
Interested in: light weight flippers w/cf around <=4.5oz
Fixed blades: 4-7 inch drop point/ish, tall blades ex:bark river
Pm or post what you have, thanks!
Bought used, Carried some, opened boxes. Doesn't show much wear.
It's been taken apart, cleaned, oiled. Stronger detent and fires hard. Solid lockup.
https://imgur.com/ZwduW10
https://imgur.com/a/MhGAiEr
ADV Scavenger
https://imgur.com/HGkOBDO
Knife was disassembled, re oiled and removed tiny bur inside the milled area on the blade where the really nice semi sealed pivot cups and dual row bearings ride. There is also a tiny area behind the lock bar that wasn't rounded so i started to with a ceramic stone but stopped. Something hard to notice unless you look hard.
Really nice action, detent on the stronger side but can still be flicked. Nice sound on opening and closing.
Interested in: light weight flippers w/cf around <=4.5oz
Fixed blades: 4-7 inch drop point/ish, tall blades ex:bark river
Pm or post what you have, thanks!