scalpel_ninja
Gold Member
- Joined
- Feb 17, 2020
- Messages
- 86
All prices include insured shipping within the US50. Payment via PayPal FF with no notes or comments.
Timestamp
Trade interests: CRK Large Inkosi DP, preferably Magnacut, but will consider other steels, users preferred
Hinderer XM-18 3.5 4th Gen SV/TV 325
Solid tank of a knife. Older version running on Teflon washers and very smooth thumb stud flicking. Flipper tab can be used with right push button technique as shown in video. These were known to have a weaker detent, but this one's decent. I'm at least the second owner, did not sharpen the edge, did disassemble it to clean and lube; also tightened the clip tension. Will come with box, peanuts, and assembly card.
Gerber Fastball SV/TV 80
Catch and release for me. I'm the second owner, did not sharpen it, did disassemble it to lube the bone dry bearings. It's now smooth with near fool-proof deployment. Lockup is late but solid. Edge is factory, uneven, but super slicey. It came to me with an undisclosed scuff on the scale and liner, no gouges or dings. Will come with box.
Boker Urban Trapper Tanto Titanium SV/TV 80 SOLD
Try saying that name five times fast! Came to be dull, so I sharpened it and corrected the uneven bevel at the tip. Now is all 20 dps, chisel tip is sharp, but not shaving, main blade has a 400 grit working edge. I corrected the blade rubbing the show side, tuned to center and with a little lock stick that is going away as it's flipped more and more. I disassembled it to clean and lube. I'm at least the second owner, prior owner definitely used it as shown in the scratches.
Timestamp
Trade interests: CRK Large Inkosi DP, preferably Magnacut, but will consider other steels, users preferred
Hinderer XM-18 3.5 4th Gen SV/TV 325
Solid tank of a knife. Older version running on Teflon washers and very smooth thumb stud flicking. Flipper tab can be used with right push button technique as shown in video. These were known to have a weaker detent, but this one's decent. I'm at least the second owner, did not sharpen the edge, did disassemble it to clean and lube; also tightened the clip tension. Will come with box, peanuts, and assembly card.
Gerber Fastball SV/TV 80
Catch and release for me. I'm the second owner, did not sharpen it, did disassemble it to lube the bone dry bearings. It's now smooth with near fool-proof deployment. Lockup is late but solid. Edge is factory, uneven, but super slicey. It came to me with an undisclosed scuff on the scale and liner, no gouges or dings. Will come with box.
Boker Urban Trapper Tanto Titanium SV/TV 80 SOLD
Try saying that name five times fast! Came to be dull, so I sharpened it and corrected the uneven bevel at the tip. Now is all 20 dps, chisel tip is sharp, but not shaving, main blade has a 400 grit working edge. I corrected the blade rubbing the show side, tuned to center and with a little lock stick that is going away as it's flipped more and more. I disassembled it to clean and lube. I'm at least the second owner, prior owner definitely used it as shown in the scratches.
Last edited: