Hey everybody! Running a sale until they all go or become Christmas gifts! Most of these are marked 50% off, I hope you take advantage of the savings!
I will ship U.S.P.S and it usually takes 3-4 days so these could be there in time for Christmas! All prices are shipped in ConUS, but I will ship elsewhere. Buyer pays fees.
Preferred payment is PayPal and it is bmoody123456@gmail.com
I have this stuff listed elsewhere so first time stamp scores!
Please find me at bmoodybladeworx on Instagram!
Thanks for looking, questions and comments welcomed!
First up is this Defender. Made from 1/8" 1095, it has stabilized box elder burl and a hand stitched and tooled leather sheath.
OAL 8&7/8"
Blade 4&1/2" tip to scales
Rc 60
1/8" copper tubing
Hammered flats
$115 shipped ConUS
Next up is Defender #2
Made from 1/8" 1095 with black and orange g10 and a hand stitched and tooled leather sheath.
OAL 9&1/8"
Blade 5&1/8" tip to scales
Rc 60
3/16" stainless tubing.
SOLD shipped ConUS
Defender #3
Made from 1/8" 1095. It has black and green g10 with white liners, 1/8" stainless pins and hammer textured flats. I tooled a skull on the sheath and it is set up for horizontal or vertical belt carry.
OAL 9"
Blade 4&7/8" tip to scale
Rc 60
SOLD shipped ConUS
Next is this Companion I made from 3/16" 80crv2. I gave it a copper wash then hand sanded the bevels to 600 grit and added maroon and black g10 with 1/8" copper tubing and 1/4" copper lanyard. The kydex sheath is drilled for a tek-lock, but it rides very comfortably in the side pocket on Carharrts.
OAL 8&1/4"
Blade 4"
Rc 59
$115 shipped ConUS
This small hunter skinner would also be a great edc. Made from 3/16" 1095, the hamon turned out great! The orange paracord is epoxied over the black hemp and the sheath is drilled for a tek-lock
OAL 7&3/4"
Blade 3&7/8" to the wrap
Rc 61
SOLD shipped ConUS
Next is this hunter skinner. I made it out of 1/8" 1084 then ground it down to .015" dunking it frequently so it didn't get hot. I left the decarb on the flats so it would pop when I gave it a copper wash. I added black canvas mycarta and black and white ebony with red liners and spacer, 3/16" copper tubing and a mosaic pin. The sheath is hand stitched and tooled.
OAL 9&1/4"
Blade 5&1/4" tip to scales
Rc 60
SOLD shipped ConUS
I made this Wharncliffe out of 3/16" 1095 and it has a great hamon. The black paracord is epoxied over the blue hemp.
OAL 8&1/8"
Blade 4" tip to wrap
Rc 61
SOLD! shipped ConUS
I made this recurved Hiker's Companion out of 3/16" 1095 and gave it textured flats. The O.D. green paracord is epoxied over the urban camo paracord.
OAL 8&1/2"
Blade 4&1/2"
Rc 60
$115 shipped ConUS
This light chopper is made from 3/16" 1095 with a pretty awesome hamon. It has black/pearl/metal flake handle with stainless hardware and I tooled and hand stitched the blade cover.
OAL 14&1/4"
Blade 8&3/4" and 2&3/4" at the belly.
Rc 60
SOLD shipped ConUS
That's all of them! Thanks for looking and happy Holidays!
I will ship U.S.P.S and it usually takes 3-4 days so these could be there in time for Christmas! All prices are shipped in ConUS, but I will ship elsewhere. Buyer pays fees.
Preferred payment is PayPal and it is bmoody123456@gmail.com
I have this stuff listed elsewhere so first time stamp scores!
Please find me at bmoodybladeworx on Instagram!
Thanks for looking, questions and comments welcomed!
First up is this Defender. Made from 1/8" 1095, it has stabilized box elder burl and a hand stitched and tooled leather sheath.
OAL 8&7/8"
Blade 4&1/2" tip to scales
Rc 60
1/8" copper tubing
Hammered flats
$115 shipped ConUS
Next up is Defender #2
Made from 1/8" 1095 with black and orange g10 and a hand stitched and tooled leather sheath.
OAL 9&1/8"
Blade 5&1/8" tip to scales
Rc 60
3/16" stainless tubing.
SOLD shipped ConUS
Defender #3
Made from 1/8" 1095. It has black and green g10 with white liners, 1/8" stainless pins and hammer textured flats. I tooled a skull on the sheath and it is set up for horizontal or vertical belt carry.
OAL 9"
Blade 4&7/8" tip to scale
Rc 60
SOLD shipped ConUS
Next is this Companion I made from 3/16" 80crv2. I gave it a copper wash then hand sanded the bevels to 600 grit and added maroon and black g10 with 1/8" copper tubing and 1/4" copper lanyard. The kydex sheath is drilled for a tek-lock, but it rides very comfortably in the side pocket on Carharrts.
OAL 8&1/4"
Blade 4"
Rc 59
$115 shipped ConUS
This small hunter skinner would also be a great edc. Made from 3/16" 1095, the hamon turned out great! The orange paracord is epoxied over the black hemp and the sheath is drilled for a tek-lock
OAL 7&3/4"
Blade 3&7/8" to the wrap
Rc 61
SOLD shipped ConUS
Next is this hunter skinner. I made it out of 1/8" 1084 then ground it down to .015" dunking it frequently so it didn't get hot. I left the decarb on the flats so it would pop when I gave it a copper wash. I added black canvas mycarta and black and white ebony with red liners and spacer, 3/16" copper tubing and a mosaic pin. The sheath is hand stitched and tooled.
OAL 9&1/4"
Blade 5&1/4" tip to scales
Rc 60
SOLD shipped ConUS
I made this Wharncliffe out of 3/16" 1095 and it has a great hamon. The black paracord is epoxied over the blue hemp.
OAL 8&1/8"
Blade 4" tip to wrap
Rc 61
SOLD! shipped ConUS
I made this recurved Hiker's Companion out of 3/16" 1095 and gave it textured flats. The O.D. green paracord is epoxied over the urban camo paracord.
OAL 8&1/2"
Blade 4&1/2"
Rc 60
$115 shipped ConUS
This light chopper is made from 3/16" 1095 with a pretty awesome hamon. It has black/pearl/metal flake handle with stainless hardware and I tooled and hand stitched the blade cover.
OAL 14&1/4"
Blade 8&3/4" and 2&3/4" at the belly.
Rc 60
SOLD shipped ConUS
That's all of them! Thanks for looking and happy Holidays!
Last edited:
