I've got a few knives here that I really don't want to get rid of, but money is a bit tight and I've got some things I need to pay for. More pictures upon request. Please contact me via PM or Email. These knives are listed on other forums so I will be following time stamps. An "I'll take it" in the thread is always appreciated. I'm not really looking for trades, but I have a hard time turning down RJ Martins, Brad Southards, or other Les George knives. If you're not offering up an RJ Martin, Brad Southard, or Les George please don't ask if I want to trade. The prices are the prices. Please don't send me lowball offers because I won't even respond.
- All prices include shipping via USPS Priority with Delivery Confirmation.
- I accept PayPal or USPS Money Orders. If using PayPal please let me know and we will split the fees at 3.5%.
- These knives are for sale in the Continental United States at the prices shown. I will also ship to our Canadian friends up north for the added shipping costs. Sorry rest of the world.
SOLD SOLD SOLD Yuna Mini Hard-1 Type S -- This one really hurts to get rid of. I love my Yunas and for good reason. Yun makes one hell of a knife. This knife has been carried only a handful of times. It hasn't been used to cut nor has it been sharpened. The edge is exactly how it came from Yun. The scale is corrugated smooth red G-10. The blade is bead blasted ZDP-189 laminated with ATS-34. This is the old stock that Yun used to use, he now uses non laminated ZDP-189. This blade has the small choil so you lose no cutting edge. Yun's Type S models increase the thickness on everything. The blade goes from 4mm to 5mm thickness. The frame goes from 3mm to 5mm thickness. The backspacer (this particular model uses standoffs) from 1.5mm to 2mm. The lockbar stop and the pocket clip thickness goes from 1.2mm to 1.5mm. The pivot screw shaft diameter goes from 6mm to 8mm. Needless to say, it's beefy. This exact model would cost you $700 from Yun right now. That doesn't include shipping, but does include a wait of about 8 months. Comes in its camo velcro pouch. The blade is just ever so slightly off center. -- WAS $650.00 NOW $625.00 SOLD SOLD SOLD
OAL - 7 1/2"
Closed - 4 1/2"
Blade - 3"
Weight - 6.38 oz.
SOLD SOLD SOLD Martin Knives Large Tejas Gen. 1 -- I am the second owner of this knife. The lockup is solid and there is no side to side play. The blade has been stropped and is shaving sharp. Satin finish S30V blade with single thumb stud. Tip up stainless steel pocket clip. Stainless steel standoffs. Smooth Black G-10. The Ti side has a few very faint rub marks from pocket carry. The blade has no scratches that I can see in different angles of light and is centered upon closure. Comes in a padded zippered pouch. -- $240.00 SOLD SOLD SOLD
OAL - 7 1/4"
Closed - 4 1/4"
Blade - 3" w/ 2 3/4" cutting edge
Weight - 2.92 oz.
SOLD SOLD SOLD Brian Flud Teardrop Flipper -- This was made for me by Brian at my request. This is a beast of a knife and it is not for small hands or folks who dislike heavy knives. I've only carried it once and I've never used it on anything. The blade is satin finished CPM154 from 3/16" stock and is very sharp as it came from Brian. It flips very nicely for me with no wrist action and a nice "thunk" at the end when it locks up. The forward choil offers the option of an extremely choked up grip. The tip up pocket clip is Ti and is "screwless". The screws for the clip are installed from the inside. The hardware is all satin finished. The scales are smooth bead blasted 1/8" Ti and the backspacer is Ti as well. The blade is centered upon closure. The knife comes in a camo padded velcro pouch. I paid about $400 for this knife, but it's going for -- $300.00 SOLD SOLD SOLD
OAL - 9 1/4"
Closed - 5 1/2"
Blade - 3 5/8" w/ 3 1/2" cutting edge
Weight - 8.92 oz.
SOLD SOLD SOLD Deviant Blades Buffalo Folder -- This was made by Filip de leeuw. It has been carried a couple of times and the edge has been stropped. It hasn't been used to cut anything. Spyder hole opening. Satin finished RWL-34 blade. Tip up Ti pocket clip anodized bluish purple. Ti lockside with OD Green smooth G-10 scale that has been rounded at the apex. Very comfortable in the hand. Smooth action and tight lockup. The backspacer is Aluminum. The blade is not centered upon closure, but does not come in contact with either side. Comes in a padded zippered pouch. -- $300.00 SOLD SOLD SOLD
OAL - 9"
Closed - 5"
Blade - 4" w/ 3 7/8" cutting edge
Weight - 4.94 oz.
SOLD SOLD SOLD Les George FM-1 -- This knife has been carried, used, and sharpened on the Edge Pro. The edge has been refinished to a 1200 grit stone and is crazy sharp. Foolishly, this was one of the first knives I sharpened on the Edge Pro so proper precautions were not taken and now there is some scuffing on the blade. I have also reprofiled the tip of this knife to make it a bit more pointy. Thumbdisk opener. CPM154 blade. Full Ti scales that are rounded and not flat. So comfortable in the hand. The action is insanely smooth and the lock up is rock solid with zero play. Tip up pocket clip. Blade is centered upon closure. -- $450.00 SOLD SOLD SOLD
OAL - 8 1/4"
Closed - 4 3/4"
Blade - 3 5/8"
Weight - 5.66 oz.
- All prices include shipping via USPS Priority with Delivery Confirmation.
- I accept PayPal or USPS Money Orders. If using PayPal please let me know and we will split the fees at 3.5%.
- These knives are for sale in the Continental United States at the prices shown. I will also ship to our Canadian friends up north for the added shipping costs. Sorry rest of the world.
SOLD SOLD SOLD Yuna Mini Hard-1 Type S -- This one really hurts to get rid of. I love my Yunas and for good reason. Yun makes one hell of a knife. This knife has been carried only a handful of times. It hasn't been used to cut nor has it been sharpened. The edge is exactly how it came from Yun. The scale is corrugated smooth red G-10. The blade is bead blasted ZDP-189 laminated with ATS-34. This is the old stock that Yun used to use, he now uses non laminated ZDP-189. This blade has the small choil so you lose no cutting edge. Yun's Type S models increase the thickness on everything. The blade goes from 4mm to 5mm thickness. The frame goes from 3mm to 5mm thickness. The backspacer (this particular model uses standoffs) from 1.5mm to 2mm. The lockbar stop and the pocket clip thickness goes from 1.2mm to 1.5mm. The pivot screw shaft diameter goes from 6mm to 8mm. Needless to say, it's beefy. This exact model would cost you $700 from Yun right now. That doesn't include shipping, but does include a wait of about 8 months. Comes in its camo velcro pouch. The blade is just ever so slightly off center. -- WAS $650.00 NOW $625.00 SOLD SOLD SOLD
OAL - 7 1/2"
Closed - 4 1/2"
Blade - 3"
Weight - 6.38 oz.
SOLD SOLD SOLD Martin Knives Large Tejas Gen. 1 -- I am the second owner of this knife. The lockup is solid and there is no side to side play. The blade has been stropped and is shaving sharp. Satin finish S30V blade with single thumb stud. Tip up stainless steel pocket clip. Stainless steel standoffs. Smooth Black G-10. The Ti side has a few very faint rub marks from pocket carry. The blade has no scratches that I can see in different angles of light and is centered upon closure. Comes in a padded zippered pouch. -- $240.00 SOLD SOLD SOLD
OAL - 7 1/4"
Closed - 4 1/4"
Blade - 3" w/ 2 3/4" cutting edge
Weight - 2.92 oz.
SOLD SOLD SOLD Brian Flud Teardrop Flipper -- This was made for me by Brian at my request. This is a beast of a knife and it is not for small hands or folks who dislike heavy knives. I've only carried it once and I've never used it on anything. The blade is satin finished CPM154 from 3/16" stock and is very sharp as it came from Brian. It flips very nicely for me with no wrist action and a nice "thunk" at the end when it locks up. The forward choil offers the option of an extremely choked up grip. The tip up pocket clip is Ti and is "screwless". The screws for the clip are installed from the inside. The hardware is all satin finished. The scales are smooth bead blasted 1/8" Ti and the backspacer is Ti as well. The blade is centered upon closure. The knife comes in a camo padded velcro pouch. I paid about $400 for this knife, but it's going for -- $300.00 SOLD SOLD SOLD
OAL - 9 1/4"
Closed - 5 1/2"
Blade - 3 5/8" w/ 3 1/2" cutting edge
Weight - 8.92 oz.
SOLD SOLD SOLD Deviant Blades Buffalo Folder -- This was made by Filip de leeuw. It has been carried a couple of times and the edge has been stropped. It hasn't been used to cut anything. Spyder hole opening. Satin finished RWL-34 blade. Tip up Ti pocket clip anodized bluish purple. Ti lockside with OD Green smooth G-10 scale that has been rounded at the apex. Very comfortable in the hand. Smooth action and tight lockup. The backspacer is Aluminum. The blade is not centered upon closure, but does not come in contact with either side. Comes in a padded zippered pouch. -- $300.00 SOLD SOLD SOLD
OAL - 9"
Closed - 5"
Blade - 4" w/ 3 7/8" cutting edge
Weight - 4.94 oz.
SOLD SOLD SOLD Les George FM-1 -- This knife has been carried, used, and sharpened on the Edge Pro. The edge has been refinished to a 1200 grit stone and is crazy sharp. Foolishly, this was one of the first knives I sharpened on the Edge Pro so proper precautions were not taken and now there is some scuffing on the blade. I have also reprofiled the tip of this knife to make it a bit more pointy. Thumbdisk opener. CPM154 blade. Full Ti scales that are rounded and not flat. So comfortable in the hand. The action is insanely smooth and the lock up is rock solid with zero play. Tip up pocket clip. Blade is centered upon closure. -- $450.00 SOLD SOLD SOLD
OAL - 8 1/4"
Closed - 4 3/4"
Blade - 3 5/8"
Weight - 5.66 oz.
Last edited:
