ZT 0560, 0909 , ADAMAS BEATER , ALL SOLD

Status
Not open for further replies.

luethge

Gold Member
Feedback: +556 / =0 / -0
Joined
May 16, 2017
Messages
5,300
77EFA0B1-D459-4EFA-B876-D231350E28E7.jpeg E24F24CC-627A-48C0-A0AC-E79D7B25F91D.jpeg 9EAE97FA-4825-4938-B315-C05EE44A99DE.jpeg 592257D5-7DDD-4277-9422-80628700F6EB.jpeg 06B3995B-21CA-4C09-BF0D-3FDEAA8A941F.jpeg FCA9255A-E4D9-4557-8CE9-DC26D663EE2B.jpeg A1E17A5B-1EF0-4D7F-913D-706C603F2A45.jpeg


3 knives for sale (potentially trade towards XM 18 3.5 ‘s without choil , + cash from my end).

I just noticed that the smudges in the pics are from oil , the specks on the 0909 handle are from stopping compound , and the ADAMAS is angry.

ZT 0560 w lock bar insert: SOLD to Carsnrockmusic!
Elmax, very, very lightly used. I am the second owner. I believe the only reason the first owner sold it to me was the micro dent in the tip? Barely noticeable from 3 feet.. but noticeable. The tip is pictured, ENLARGING the dent so there is no surprise to any potential buyer. This imperfection will disappear after a single, light , touch up / sharpen. The only reason I’ve not taken care of the imperfection is : the knife has its factory edge, it’s still decently sharp, shaves hair.

Perfectly centered, ZERO PLAY in any direction, very smooth action, good flipping, usable thumb studs with medium detent, drops shut under the blades weight without user assistance, lock up is at roughly 19-21 %.

Black G10 , clip is currently on the left , clip has a few carry marks.

I’m selling this one because it’s bigger than I need in a pocket knife. I prefer a small fixed blade.

$207 PayPal, shipping + fees included.

ZT 0909: SOLD to champtime !
Catch / release, S35VN, perfect flipping action, damn near razor blade sharp factory edge , has been stropped on green compound and lightly pulled across fine ceramic rods, perfect centering (even though the liner lock makes it look off center, it’s not).

NO PLAY in any direction, drops shut with a little shaking, clip is currently on the left.

*** I had the idea of removing the thumb ramp, I spent about 5 minuets with 400 grit paper on the thumb ramp.. I got nowhere, there is a shiny spot that won’t show up in crappy phone pics, you probably wouldn’t even notice had it not been mentioned, FULL DISCLOSURE ***

Great utility/defensive edc

Original box, bag and warranty card included for the 0909.

$105 PayPal, shipping + fees included.

BENCHMADE ADAMAS BEATER: SOLD to OfficerCamp !
Carried since 2011 if I remember correctly. Original owner. Used , abused , lost , found , dropped , battened ( while the lock was disengaged ), prying paint cans open, cut through 100’s of boxes, cut zip ties , opened bags of cement, lifted roofing tiles, cut cans open, cut my thumb open , finger opened and put holes in a dining room table to impress friends (a few years ago in the drinking days).

This knife never failed me , I’ve beaten the snot out of it for a long time , it’s been sharpened about 7 times (benchmade D2 hold an edge !), the serrations were run through a work sharp in an attempt to get rid of them.. the result is a weird compound grind that cuts like crazy and holds an edge .

This knife should have a book written about its adventures.

This one has been taken apart and cleaned once, has not been used since.

There is a slight amount of vertical play if you really pull on the blade. I have a feeling new omega springs will cure that. The knife opens smoothly, requires a wrist shake to drop shut.

No clip.

I’ll include an old black canvas Leatherman sheath.

$70$ PayPal, shipping + fees included.


Thanks for reading my coffee rant..

Any questions please email at

none 22 @ Mac . com

^ remove the spaces ^

Or pm

USA shipping preferred

18 + only

Please understand and respect your local laws

Thank you Blade forums!!

Have a good day.
 
Last edited:
Status
Not open for further replies.
Back
Top