ZT fixed and folders, Bradshaw, Leethal, and Calavera

jkwithawave

.....
Feedback: +151 / =0 / -0
Joined
Sep 8, 2011
Messages
2,693
20190701_213914.jpg 20190701_213738.jpg 20190701_213723.jpg 20190701_213633.jpg
I've got some knives up for trade.


U.S. only, 18+ only, Members with no or low feedback may be asked to ship first. I can deal or not deal with whomever I choose.


PM or leave your email address in a profile message or in the thread if you can't PM. Please don't leave your phone number, I will not respond through that avenue. If you’ve got something I’m interested in we can exchange pics through email.


I’m mostly interested in a Waynorth Lambsfoot(any cover) and a Northwoods Norfolk Whittler(3 blade) in purple camel bone. I’m open to any knife offer , though.

I’m also interested in non knife offers. Mostly gun parts or guns for multiple knives. Any offer is welcome.

All knives have been used, some more than others.





Folders

ZT 0393- CPM 20CV Used, in good condition. Smooth flipping action and solid lockup. Centering is very good, maybe slightly favoring the non lock side. Edge was re-profiled by previous owner. Nearly mirror edge. Decently sharp, not quite shaving anymore as I’ve used it a bit. I haven’t it sharpened it any myself. Scratches on the blade from use. There’s a good scuff in the DLC between the seriel # and stop pin and on the flipper tab and some other smaller ones elsewhere. Some scuffs in the blue anodizing on the scales. Two dings on the scales at the bottom from where I dropped it. I coulnd’t find any marks on the G10 overlay, but just assume there are some. Paint is chipping the pocket clip and filler tab. Does not include box or paperwork.

ZT 0620CF Cts204P- Used. In good condition with solid lock up with no blade play. Smooth opener when, but doesn’t flip open very well. Centering slightly favors show side. Some scratches on the blade from use. Some scratches/snail trails in the Ti scale the mostly blends in with the stonewashing. Some scuffing in the carbon fiber. Some wear on the hardware and pocket clip. Comes with original pocket clip only. No box or paperwork.


Cavalera Cutlery Model 4- CTS XHP- Black micarta inlay and orange peel(I think that’s what it is) Ti finish- I received this one in a trade. Centering seems pretty good, maybe ever so slightly to the show side. Lock is a little sticky. When I received it there was a hint of up/down blade play. I heard a slight click against the stop pin more than I could feel it. I used a Qtip to wipe off the blade tang where it locks up, that seems to have cleared it up. I think it was just slipping on some graphite. It was probably carried and used a little by a previous owner as theres minor scratches on the blade that I couldn’t really capture in pics. The handle finish on the show side compared to lock side is less uniform which makes me think it was carried. There’s some discoloration and what looks like a machining mark in the thumb hole that I just now noticed. Does not come with any box or paperwork. It does come with a plastic tube, not sure if it is original to this knife or not.






Fixed Blades- None of the fixed blades come with original boxes.

Bradshaw blades cord wrapped tanto 52100. This has been carried and used. I tried my hand at applying a forced patina using mustard. It’s overall pretty dark and kind of ugly imo. The blade is decently sharp but could use a touch up. Comes with a kydex sheath that’s a little loose and has few dings on the carbon fiber textured side


Leethal Cutlery wharncliff in W2 and black micarta handles. The scales are pretty marked up. More than I could capture in pictures. The blade has a solid amount of staining/patina. There also is a little bit of red rust I think right where the blade meets the handle scales. The convex edge is quite sharp, but has a few minor chips in the edge. This one comes with two kydex sheaths. A neck sheath and a belt sheath. Both have good retention. The belt sheath has a kydex belt loop attached to it. It will only fit about 1.25” belt, slim one at that. If you wear a belt designed to carry a firearm this more than likely will NOT fit.


ZT 0100- Some marks on the blade from use and the sheath. Some slight discoloration and a roll on the edge. Comes with original sheath with drop leg and thigh strap. I did put some gorilla tape on the kydex insert of the sheath to thumb press on the draw.

ZT0121- Used. In good condition. Scuffs(some are blue?) in the DLC from use and sheath. Some scuffs on the handles. Comes with original sheath and a custom. The originals retention is pretty loose but has the strap so it works. The strap is chewed up some from inserting the blade. The custom sheath has pretty good retention. Draws nicely but difficult to insert. Comes with a large teklok.


Hardedge knives- Storm?- cordwrapped 1095. 1/8” thick. Around 8” overall. Used with a good amount of patina and spotting on the blade. Still pretty sharp. Comes with kydex sheath that has some paracord on it.

Bradshaw blades cord wrapped tanto 52100. This has been carried and used. I tried my hand at applying a forced patina using mustard. It’s overall pretty dark and kind of ugly imo. The blade is decently sharp but could use a touch up. Comes with a kydex sheath that’s a little loose and has few dings on the carbon fiber textured side


Leethal Cutlery wharncliff in W2 and black micarta handles. The scales are pretty marked up. More than I could capture in pictures. The blade has a solid amount of staining/patina. There also is a little bit of red rust I think right where the blade meets the handle scales. The convex edge is quite sharp, but has a few minor chips in the edge. This one comes with two kydex sheaths. A neck sheath and a belt sheath. Both have good retention. The belt sheath has a kydex belt loop attached to it. It will only fit about 1.25” belt, slim one at that. If you wear a belt designed to carry a firearm this more than likely will NOT fit.
 
Last edited:
Back
Top