- Joined
- May 13, 2013
- Messages
- 65
i own just this one #116
-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
ZT Folders You Currently Own
- Thread starter RamZar
- Start date
I'm in the same boat. I've never even seen or held one.
My bad .. I didn't see it listed in your original post. I started thinking maybe I was searching for the wrong model number.
Do any of the ZT Auto's have a non serrated blade?
RamZar
Gold Member
- Joined
- Mar 3, 2013
- Messages
- 11,599
Not sure but both of the ones listed on Blade HQ (out of stock) have partially serrated edges.
BlackOpsSec probably knows.
- Joined
- Feb 20, 2007
- Messages
- 386
My ZT 0610 and ZT 0650 both have serrated blades. As far as I know, all of the 0610 and 0650 have serrated edges. The model numbers for these are 0610ST and 0650ST.
The Kershaw Rogue came with both satin and black blades, and each blade finish was offered with plain and serrated edges.
Model #s for the rogue: 2001, 2001ST, 2001CKT, 2001CKTST
so there are, to my knowledge, 4 versions of the Rogue.
The Kershaw Breakout came with satin and black finishes, and both serrated and plain edges. The handle came in a variety of colors: red, pink, green, blue, blue-black, purple, and black.
Model #s for the Breakout: 7000, 7000ST, 7000CKT, 7000CKTST, 7000PINK, 7000BB (black and blue), 7000D (green), 7000RD (red), 7000BL (blue), 7000PURPLE
I believe there are 10 versions of the Breakout.
All of the colored models (other than black handle) came with satin finish, plain edge blades only.
All of the above info is based on my research and correct to my knowledge, but I'm not a Kershaw authority by any means, so I could be wrong about some of this.
I have no idea about production numbers, but I'm guessing all of the colored handle Breakouts are extremely rare (less than 500 of each?).
The Kershaw Rogue came with both satin and black blades, and each blade finish was offered with plain and serrated edges.
Model #s for the rogue: 2001, 2001ST, 2001CKT, 2001CKTST
so there are, to my knowledge, 4 versions of the Rogue.
The Kershaw Breakout came with satin and black finishes, and both serrated and plain edges. The handle came in a variety of colors: red, pink, green, blue, blue-black, purple, and black.
Model #s for the Breakout: 7000, 7000ST, 7000CKT, 7000CKTST, 7000PINK, 7000BB (black and blue), 7000D (green), 7000RD (red), 7000BL (blue), 7000PURPLE
I believe there are 10 versions of the Breakout.
All of the colored models (other than black handle) came with satin finish, plain edge blades only.
All of the above info is based on my research and correct to my knowledge, but I'm not a Kershaw authority by any means, so I could be wrong about some of this.
I have no idea about production numbers, but I'm guessing all of the colored handle Breakouts are extremely rare (less than 500 of each?).
The only ZT I have is the ZT302. Funny story. I got this knife the 1st week they came out. I was at a gun show and a friend/dealer of mine showed it to me. He said he ordered it from Kershaw with his monthly order but, it was to big for his hand. It didn't feel good to him. I said I would buy it for what his dealer cost was. That's how I got it.
A few months later, I was moving the pocket clip from tip down to tip up and I found that the screws were too long. I called Kershaw, told them what was up and they sent me new screws. The new screws were also too long. I called them again and they sent me a new clip with screws. This also did not work. Back to the phone. In talking to a tech at Kershaw, he decided that the holes for the screws had not been drilled deep enough. He said he would take care of me. Three weeks later, a complete 302 minus the blade arrived it the mail. In the mean time, I had shortened a set of the screws they'd sent me. It worked perfectly.
So, now I have a second 302 minus the blade. It sits in a drawer wanting for a blade. What to do...? And that is the story of my ZT302('s).
A few months later, I was moving the pocket clip from tip down to tip up and I found that the screws were too long. I called Kershaw, told them what was up and they sent me new screws. The new screws were also too long. I called them again and they sent me a new clip with screws. This also did not work. Back to the phone. In talking to a tech at Kershaw, he decided that the holes for the screws had not been drilled deep enough. He said he would take care of me. Three weeks later, a complete 302 minus the blade arrived it the mail. In the mean time, I had shortened a set of the screws they'd sent me. It worked perfectly.
So, now I have a second 302 minus the blade. It sits in a drawer wanting for a blade. What to do...? And that is the story of my ZT302('s).
- Joined
- May 2, 2013
- Messages
- 258
560
561
301
302
303
Hoping to add a 300 and 300BW, would love to get another 302, a 500, 454, 566, 801cf, and maybe a 560cbcf if I came across a great deal on one. Annnnd after seeing what I already own and want I want to get, I think I have an addiction.
RamZar
Gold Member
- Joined
- Mar 3, 2013
- Messages
- 11,599
Last edited:
560
561
301
302
303
Hoping to add a 300 and 300BW, would love to get another 302, a 500, 454, 566, 801cf, and maybe a 560cbcf if I came across a great deal on one. Annnnd after seeing what I already own and want I want to get, I think I have an addiction.
That is one hell of a pic, I love it.
- Joined
- Jul 19, 2013
- Messages
- 21
I sure wish I could afford a ZT, I am saving up though
CJZ
Gold Member
- Joined
- Dec 18, 2012
- Messages
- 3,746
- Joined
- Aug 10, 2012
- Messages
- 6,586
I've now got a 0551.
- Joined
- Jul 19, 2013
- Messages
- 21
Does anybody have a "pimped" ZT 0560 they could show? I've been saving up for one and want to customize it
- Joined
- Oct 26, 2012
- Messages
- 1,203
