First up is my Benchmade 300-1. This knife has seen very limited use and has a pretty good action (besides the flipper needing a significant pre-load technique to be used). The centering favors the left side pretty badly but does not rub the liners. The blade also has some play but it is not terrible and doesn't affect the lockup at all. The blade has only been stropped not sharpened but it is fairly sharp as I rarely carry this knife.Comes with a black clip on it and a silver clip also. Asking $old shipped CONUS.
Images: https://imgur.com/a/IHvjC
Next up is my ZT 0450 CF. I've carried this knife for a while but It shows very little wear. I re-profiled it to 20 DPS on my KME and then stropped it and it is hair popping sharp. The clip has minor nicks and the stones on the kme caught the tip of the scale and rubbed off the coating a bit, but not noticeable unless you are looking. One of the scale screws is a little stripped but not to the point of no return and ZT will mail you a set no questions asked if you fill out a warranty claim. Asking $130 shipped CONUS.
Images: https://imgur.com/a/GuQsIbC
Next is a ZT 0620. I've maybe carried this knife 5 times total. The only wear visible is on the clip and even then its very minute scratches. The knife has a rock solid lockup and is super smooth with no blade play. I re-profiled it to 22 DPS and then stropped it and it might honestly be the sharpest I personally have ever gotten a knife to be. Asking $old shipped CONUS.
Images: https://imgur.com/a/PMUr4Ls
Continuing the collection cleanse, this is my Blurple PM2 in s110v. I've carried it a lot and used it a decent amount as well. It's held up[ surprisingly well, with some super minor scratches on the tip of the clip. I re-profiled the blade to 17 DPS (its held up very well at this thin of an edge). The only sharpening issue is that the factory grind was really steep where the plunge grind is which caused the stones on my kme to miss that spot. Nothing I could really do without spending hours grinding away more metal than was worth it for the part of the blade I use the least. My only other issue with the knife is that I had to disassemble it to clean it out and half the screws stripped doing so. The action is pretty smooth and will drop shut but the blade has a tiny bit of play. Asking $old shipped CONUS.
Images:https://imgur.com/a/gWN61bH
Finally, My WE Zeta. I have never carried this knife nor has it cut even paper. I flipped it about 20 times just to see how the action was (it's ridiculously smooth btw) and then stuck it back in the box and into the safe it went. Its number 215/700 and comes in the exact same condition it was shipped from blade HQ in. Asking $270 shipped CONUS.
Images: https://imgur.com/a/cym5SkT
All knives come in their original boxes. If you would like any additional images email me at killerantonio2000@gmail.com. Prices are negotiable within reason, just ask me and I would prefer paypal G&S for payment. Thanks for looking - Anthony
Images: https://imgur.com/a/IHvjC
Next up is my ZT 0450 CF. I've carried this knife for a while but It shows very little wear. I re-profiled it to 20 DPS on my KME and then stropped it and it is hair popping sharp. The clip has minor nicks and the stones on the kme caught the tip of the scale and rubbed off the coating a bit, but not noticeable unless you are looking. One of the scale screws is a little stripped but not to the point of no return and ZT will mail you a set no questions asked if you fill out a warranty claim. Asking $130 shipped CONUS.
Images: https://imgur.com/a/GuQsIbC
Next is a ZT 0620. I've maybe carried this knife 5 times total. The only wear visible is on the clip and even then its very minute scratches. The knife has a rock solid lockup and is super smooth with no blade play. I re-profiled it to 22 DPS and then stropped it and it might honestly be the sharpest I personally have ever gotten a knife to be. Asking $old shipped CONUS.
Images: https://imgur.com/a/PMUr4Ls
Continuing the collection cleanse, this is my Blurple PM2 in s110v. I've carried it a lot and used it a decent amount as well. It's held up[ surprisingly well, with some super minor scratches on the tip of the clip. I re-profiled the blade to 17 DPS (its held up very well at this thin of an edge). The only sharpening issue is that the factory grind was really steep where the plunge grind is which caused the stones on my kme to miss that spot. Nothing I could really do without spending hours grinding away more metal than was worth it for the part of the blade I use the least. My only other issue with the knife is that I had to disassemble it to clean it out and half the screws stripped doing so. The action is pretty smooth and will drop shut but the blade has a tiny bit of play. Asking $old shipped CONUS.
Images:https://imgur.com/a/gWN61bH
Finally, My WE Zeta. I have never carried this knife nor has it cut even paper. I flipped it about 20 times just to see how the action was (it's ridiculously smooth btw) and then stuck it back in the box and into the safe it went. Its number 215/700 and comes in the exact same condition it was shipped from blade HQ in. Asking $270 shipped CONUS.
Images: https://imgur.com/a/cym5SkT
All knives come in their original boxes. If you would like any additional images email me at killerantonio2000@gmail.com. Prices are negotiable within reason, just ask me and I would prefer paypal G&S for payment. Thanks for looking - Anthony
Last edited:
