Most are sold out but we kept a few back for the Bladeforums and another US forum. Details below. We are also keeping back a few that are not part of the promotional pricing. These will retail at the RRP below mentioned below.
thanks
Matt
******************************************************************************************************************************************
Orders for the ZU Bladeworx Viper are now open!
We are now taking orders for the ZU Bladeworx Viper! The knives should be shipping in approximately 2 weeks. We are just finishing off an order for a large client but that should be done in the next couple of days.
Attached is a pic of the Viper before sharpening. The edges will be the same style as the Scout (polished hand finish done on slack belt then Japanese water stones). This means that the silver line may not be dead straight, as it is a custom edge.
Details as follows;
· 6.5 inch Blade
· 5 inch Handle
· About 500grams in weight (feels lighter and better balanced than the Scout)
· Machined from one piece of Cryodur 2363 (German A2 tool steel)
· Blade is 0.25inch thick and handle is 0.5 inch thick
· Double tempered to RC 58 (first temper at 450 degrees C, second temper at 400 degrees C)
· Cerakoted in Sniper Grey (all are grey this time)
· Kydex sheath supplied drilled for tek-lok/molle ( tek-lok/molle not supplied)
· 100% Australian made in Western Sydney, NSW.
SOLD OUT NOW..........The regular price will be $499 AUD plus $15 post to AU and $35 to USA for any leftovers.
We don’t have a heap of these available and may not make any more straight away as we are working on some other projects. If you want a knife from us, now is the time to get one.
Please email info@zubladeworx.com.au to confirm your interest. This offer will be available until the 1/1/2014 EST or until sold out.
thanks
Matt
******************************************************************************************************************************************
Orders for the ZU Bladeworx Viper are now open!
We are now taking orders for the ZU Bladeworx Viper! The knives should be shipping in approximately 2 weeks. We are just finishing off an order for a large client but that should be done in the next couple of days.
Attached is a pic of the Viper before sharpening. The edges will be the same style as the Scout (polished hand finish done on slack belt then Japanese water stones). This means that the silver line may not be dead straight, as it is a custom edge.
Details as follows;
· 6.5 inch Blade
· 5 inch Handle
· About 500grams in weight (feels lighter and better balanced than the Scout)
· Machined from one piece of Cryodur 2363 (German A2 tool steel)
· Blade is 0.25inch thick and handle is 0.5 inch thick
· Double tempered to RC 58 (first temper at 450 degrees C, second temper at 400 degrees C)
· Cerakoted in Sniper Grey (all are grey this time)
· Kydex sheath supplied drilled for tek-lok/molle ( tek-lok/molle not supplied)
· 100% Australian made in Western Sydney, NSW.
SOLD OUT NOW..........The regular price will be $499 AUD plus $15 post to AU and $35 to USA for any leftovers.
We don’t have a heap of these available and may not make any more straight away as we are working on some other projects. If you want a knife from us, now is the time to get one.
Please email info@zubladeworx.com.au to confirm your interest. This offer will be available until the 1/1/2014 EST or until sold out.
Last edited: