-
All For Sale threads must have a pic showing the knife being sold with written date listed, your username & Bladeforums or BFC to prevent photo harvesting from elsewhere - scammers hate this one trick! The rules for The Exchange can be found here. Please read and follow them. Stop using Paypal Friends & Family and follow our best practices to prevent getting ripped off or having a bad deal.
-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
1/4" x 11/2" and 1/4" x 1" 1084 AVAILABLE!
- Thread starter Aldo Bruno
- Start date
Matthew Gregory
Chief Executive in charge of Entertainment
- Joined
- Jan 12, 2005
- Messages
- 6,390
Hey Aldo,
I bought a bunch of this wonderful W2 stuff from you (really from that shady partner of yours Mace), and I wanted to know if you had the analysis results for it still... I've been looking all over for it, and can't seem to come up with it!
Thanks in advance! I'm hoping to get a hundred pounds more from you two in the near future!
I've got 5 gallons of Parks #50 coming from Darren Ellis soon, also... will report back with results, if you wish.
I bought a bunch of this wonderful W2 stuff from you (really from that shady partner of yours Mace), and I wanted to know if you had the analysis results for it still... I've been looking all over for it, and can't seem to come up with it!
Thanks in advance! I'm hoping to get a hundred pounds more from you two in the near future!
I've got 5 gallons of Parks #50 coming from Darren Ellis soon, also... will report back with results, if you wish.
- Joined
- Jul 30, 2004
- Messages
- 805
It's gonna be tough getting 100# together but I'll speak to Mace and see if he can fork some over. Between the 2 of us we should be able to come up with it.
If you want, I also landed a 500# odd lot of W-1. I got 7/8 sq. bar, 1"sq. bar,3/4", 1" and 11/8 rnd bar. Gotta get it tested but your welcome to try a few pieces.
Do you plan on going up to Wulfs Hammer In. We can deliver it upto you there.
As a matter of fact, if any of you guy's are going and want me to bring it up, it sure beats paying UPS!
Aldo
If you want, I also landed a 500# odd lot of W-1. I got 7/8 sq. bar, 1"sq. bar,3/4", 1" and 11/8 rnd bar. Gotta get it tested but your welcome to try a few pieces.
Do you plan on going up to Wulfs Hammer In. We can deliver it upto you there.
As a matter of fact, if any of you guy's are going and want me to bring it up, it sure beats paying UPS!
Aldo
Matthew Gregory
Chief Executive in charge of Entertainment
- Joined
- Jan 12, 2005
- Messages
- 6,390
Yup, I'll be at Dick's show, for sure... Ought to be a blast!
I'll be breaking up my 100 lbs. into some of the 1" and 1.25" 1084, too -- so you boys should easily be able to cover me.
-or I'll just steal Mace's steel!
Don't think I could hack the W1 in those sizes... remember, my skinny butt doesn't have access to a power hammer, and I'm made of piper cleaners! We'll see...
So, do you have the analysis for that W2? If not, it's not that big of a deal, but I DO love the details!
I'll be breaking up my 100 lbs. into some of the 1" and 1.25" 1084, too -- so you boys should easily be able to cover me.
-or I'll just steal Mace's steel!
Don't think I could hack the W1 in those sizes... remember, my skinny butt doesn't have access to a power hammer, and I'm made of piper cleaners! We'll see...
So, do you have the analysis for that W2? If not, it's not that big of a deal, but I DO love the details!
- Joined
- Jul 30, 2004
- Messages
- 805
The specs on the W-2 are as follows:
Carbon 1.08
Mang. .22
Silicone .25
Van. .22
JM,
If you E-mail me an address, I'll be happy to send you out a piece of the W-1 you can play with. I'm going to try and get test samples out at the beginning of the week.Should have an answer by the following.
ANYBODY ELSE WANT TO TRY THIS STUFF LET ME KNOW!!
Aldo
stovetop58@yahoo.com
Carbon 1.08
Mang. .22
Silicone .25
Van. .22
JM,
If you E-mail me an address, I'll be happy to send you out a piece of the W-1 you can play with. I'm going to try and get test samples out at the beginning of the week.Should have an answer by the following.
ANYBODY ELSE WANT TO TRY THIS STUFF LET ME KNOW!!
Aldo
stovetop58@yahoo.com
- Joined
- Jul 30, 2004
- Messages
- 805
Terry,
If I did I'd have a path worn out to my door! But, I know someone who recently had a very large piece cut into 3/8"x11/2"x 4 foot slices. I might be able to get a hold of a piece or two. This stuff still has the bark on it from the mill. What are you looking to do with it?
Aldo
stovetop58@yahoo.com
If I did I'd have a path worn out to my door! But, I know someone who recently had a very large piece cut into 3/8"x11/2"x 4 foot slices. I might be able to get a hold of a piece or two. This stuff still has the bark on it from the mill. What are you looking to do with it?
Aldo
stovetop58@yahoo.com
- Joined
- Jul 10, 2002
- Messages
- 839
That would probably work ok. Can you email me with a price for a piece or 2?
terry_dodson@yahoo.com
Thanks
terry_dodson@yahoo.com
Thanks
I was wondering if I remembered to put my real name and forum name on the letter so you'd know who the heck was asking you