- Joined
- Sep 17, 2012
- Messages
- 13,404
Hello BladeForums!
USA trades only. It is your responsibility to know your own laws, especially pertaining to autos.
Members with little to no feedback may be asked ship first.
All offers are welcome!
Please send offers through email or PM.
If you would like more pictures or have any questions don't hesitate to ask.
Rebladed Emerson Commander. Used but in solid shape. One of a kind! It has an m390 blade made by Reese Weiland and was later shaped to its current state by Charlie Mike. The blade is thicker than standard Emersons so it does not have room for any washers. Still opens smoothly though. I can easily thumb it via the wave hook. The tip is rolled a little bit but it will sharpen out (I'm not skilled enough to mess with higher end steels). Some marks on the g10, pivot screw and the clip. Locks up solid with no blade play. The lock will stick a little bit when waved. The blade sits a little towards the clip side. No box nor the original blade/washers.
Click HERE to see spine shots and measurements of the Commander.
Larry Withrow liner lock folder. Used. Good looking san mai blade but has some scratches on it. Has a small notch on the top of the spine because I dropped it. I can take and send pictures if needed. Sits just a touch off center. Locks up solid. Very small amount of up & down and side to side play. Feels more like flex but you can feel it if you look for it. On the backside, the detent hole peaks out from the scales. Anodized and slightly jeweled titanium liners. Blade rides on bearings and is very smooth when opening. If you disengage the lock and try to let the blade fall, it will only fall about half way then stop. Not sure why. Besides that it has nice action. No box.
USA trades only. It is your responsibility to know your own laws, especially pertaining to autos.
Members with little to no feedback may be asked ship first.
All offers are welcome!
Please send offers through email or PM.
If you would like more pictures or have any questions don't hesitate to ask.
Rebladed Emerson Commander. Used but in solid shape. One of a kind! It has an m390 blade made by Reese Weiland and was later shaped to its current state by Charlie Mike. The blade is thicker than standard Emersons so it does not have room for any washers. Still opens smoothly though. I can easily thumb it via the wave hook. The tip is rolled a little bit but it will sharpen out (I'm not skilled enough to mess with higher end steels). Some marks on the g10, pivot screw and the clip. Locks up solid with no blade play. The lock will stick a little bit when waved. The blade sits a little towards the clip side. No box nor the original blade/washers.
Click HERE to see spine shots and measurements of the Commander.
Larry Withrow liner lock folder. Used. Good looking san mai blade but has some scratches on it. Has a small notch on the top of the spine because I dropped it. I can take and send pictures if needed. Sits just a touch off center. Locks up solid. Very small amount of up & down and side to side play. Feels more like flex but you can feel it if you look for it. On the backside, the detent hole peaks out from the scales. Anodized and slightly jeweled titanium liners. Blade rides on bearings and is very smooth when opening. If you disengage the lock and try to let the blade fall, it will only fall about half way then stop. Not sure why. Besides that it has nice action. No box.
Last edited: