Had these listed for sale - no takers so I thought I'd see if there are any trade offers. I'm most interested in Spyderco or Benchmade but open to other offers.
Made by me, largely with hand tools. 1084 steel. 3 3/8” blade. 7 1/16” overall. 5/32” thickness. Full flat grind. Hand sanded to 220 grit. Cocobolo scales with brass hardware. Knife is weighted to handle. Very pointy tip!
Also made by me. 1084 steel. 3 1/2” blade. 7 1/8” overall. 5/32” thickness. Full flat grind. Hand sanded to 220 grit. Palm scales with brass hardware. Knife is weighted to handle. This unstabilized palm is a little...unstable. I had to repair a splinter in front of the front pin on the left side. Don't think there would be an issue unless say the knife was dropped.
Made by me, largely with hand tools. 1084 steel. 3 3/8” blade. 7 1/16” overall. 5/32” thickness. Full flat grind. Hand sanded to 220 grit. Cocobolo scales with brass hardware. Knife is weighted to handle. Very pointy tip!
Also made by me. 1084 steel. 3 1/2” blade. 7 1/8” overall. 5/32” thickness. Full flat grind. Hand sanded to 220 grit. Palm scales with brass hardware. Knife is weighted to handle. This unstabilized palm is a little...unstable. I had to repair a splinter in front of the front pin on the left side. Don't think there would be an issue unless say the knife was dropped.
Last edited:
