Archer Here
Knifemaker / Craftsman / Service Provider
- Joined
- Nov 2, 2008
- Messages
- 1,287
Dropped to $199 plus $18 ship fee
Brief History on Achilles:
Achilles was the son of the mortal Peleus and the Nereid Thetis. He was thought to be the mightiest of the Greeks who fought in the Trojan War, and was the hero of Homer's Iliad. Legend says that Achilles was invulnerable in all of his body except for his heel. Since he died due to a poisoned arrow shot into his heel, the "Achilles' heel" has come to mean a person's principal weakness.
The design of this particular sword was styled after the sword Achilles used in the move “Troy”.
Video of the Achilles Sword – Shows Trojan War Clips from “Troy”, Achilles History. Also Our Making of the Sword.
http://www.youtube.com/watch?v=LUBNHU8dnSg
Shop Details:
5160 Steel Sword was cut out and Normalized @ 1500 degrees until non magnetic, three times, to remove stresses and align crystals. Heat Hardened until sword became nonmagnetic, then quenched in 125 degree quality oil. Tempered the sword to a straw hardness @ 425 degrees for 1 hour, letting it air cool and repeating once more. Sword was file tested and is shown to be very hard.
Measurements:
Total Length = 2 foot 4”
Sword Length = 21 ¼ “
Sword Width = 3” by handle, 2 3/8” from the middle leading up to the point
Sword Thickness = ¼ “ Sharp section is 1/8 “
Handle Length = 6 ¾ “
Handle Width = 1 ¼
Handle: Scales are Walnut wood and attached with 5 hidden pins and epoxy.
Weight = 2.6 pounds
Decorative part of sword is etched by hand.
Comes with our signed Certificate of Authenticity
Dropped to $199 plus $18 shipping fee, if shipped in the US. You can send through Paypal to ScorpionBows@mchsi.com or mail M/O to our address (see web site for address).
Pictures below. Thanks.
Brief History on Achilles:
Achilles was the son of the mortal Peleus and the Nereid Thetis. He was thought to be the mightiest of the Greeks who fought in the Trojan War, and was the hero of Homer's Iliad. Legend says that Achilles was invulnerable in all of his body except for his heel. Since he died due to a poisoned arrow shot into his heel, the "Achilles' heel" has come to mean a person's principal weakness.
The design of this particular sword was styled after the sword Achilles used in the move “Troy”.
Video of the Achilles Sword – Shows Trojan War Clips from “Troy”, Achilles History. Also Our Making of the Sword.
http://www.youtube.com/watch?v=LUBNHU8dnSg
Shop Details:
5160 Steel Sword was cut out and Normalized @ 1500 degrees until non magnetic, three times, to remove stresses and align crystals. Heat Hardened until sword became nonmagnetic, then quenched in 125 degree quality oil. Tempered the sword to a straw hardness @ 425 degrees for 1 hour, letting it air cool and repeating once more. Sword was file tested and is shown to be very hard.
Measurements:
Total Length = 2 foot 4”
Sword Length = 21 ¼ “
Sword Width = 3” by handle, 2 3/8” from the middle leading up to the point
Sword Thickness = ¼ “ Sharp section is 1/8 “
Handle Length = 6 ¾ “
Handle Width = 1 ¼
Handle: Scales are Walnut wood and attached with 5 hidden pins and epoxy.
Weight = 2.6 pounds
Decorative part of sword is etched by hand.
Comes with our signed Certificate of Authenticity
Dropped to $199 plus $18 shipping fee, if shipped in the US. You can send through Paypal to ScorpionBows@mchsi.com or mail M/O to our address (see web site for address).
Pictures below. Thanks.
Last edited: