Medford Proxima-
Purchased brand new by me from BladeHQ. This knife features a stonewashed S35VN blade, black PVD titanium scales, and satin finished Ti hardware. Has been disassembled and cleaned. Please note that this no longer voids the warranty so it is still fully intact. Flips very well for a knife running on PB washers. Centering and lockup are perfect with no play in any direction. Lockup is at about 10%. It’s been used to cut Saran Wrap for leftovers but I believe that’s about it. Never sharpened and has a nice polished edge from the factory
Asking $400 **SOLD**
Medford On Belay-
Purchased brand new by me from Monkey Edge. This knife features a satin finished D2 blade, black PVD titanium scales, and satin finished Ti hardware. Has been disassembled and cleaned. Again, this no longer voids Medford’s warranty. Flips well, very smooth action, good centering, and solid lockup at about 10%. There are the very beginnings of a slight patina on the blade in certain spots. Very difficult to capture but I want to be completely truthful. Carried a little but not used very much. I buffed up the edge a little after some light use breaking down some cardboard but that’s about it.
Asking $400**SOLD**
Medford Smooth Criminal-
Purchased brand new by me from BladeHQ. This knife features a stonewashed S35VN blade, OD green aluminum scales, and satin finished hardware. I’m not sure if the hardware is Ti or stainless steel. This knife flips extremely well and has an incredibly smooth deployment. It’s been carried a little and there’s a few slight scuffs on the anodizing. This knife has never been disassembled and I’ve only buffed up the edge after some light use. This is a very fidget friendly knife if that’s your thing.
Asking $200**SOLD**
If you want to purchase all the Medfords in a bundle, you can have them all for $800. That’s a $200 discount if purchased separately
Benchmade 810 Contego-
Purchased brand new by me from BladeHQ. This knife features a gray Cerakote blade in M4 steel, black sculpted G10 scales, and stonewashed stainless steel hardware and liners. This knife has been carried and used and there are some light scuffs/smoothing on the coating but they are only noticeable in the right light. The edge has been sharpened but the factory edge angle has not been changed. It has a pretty good action for a coated blade on an Axis lock knife but it’s a little stiff still. Lockup is solid with no play but the centering slightly favors the left side. The knife has been disassembled and cleaned. This knife has been discontinued and is hard to find in a plain edge configuration. Comes with a standard Emerson clip, I do not have the original so it will not be included.
Asking $145 **SOLD**
Purchased brand new by me from BladeHQ. This knife features a stonewashed S35VN blade, black PVD titanium scales, and satin finished Ti hardware. Has been disassembled and cleaned. Please note that this no longer voids the warranty so it is still fully intact. Flips very well for a knife running on PB washers. Centering and lockup are perfect with no play in any direction. Lockup is at about 10%. It’s been used to cut Saran Wrap for leftovers but I believe that’s about it. Never sharpened and has a nice polished edge from the factory
Asking $400 **SOLD**
Medford On Belay-
Purchased brand new by me from Monkey Edge. This knife features a satin finished D2 blade, black PVD titanium scales, and satin finished Ti hardware. Has been disassembled and cleaned. Again, this no longer voids Medford’s warranty. Flips well, very smooth action, good centering, and solid lockup at about 10%. There are the very beginnings of a slight patina on the blade in certain spots. Very difficult to capture but I want to be completely truthful. Carried a little but not used very much. I buffed up the edge a little after some light use breaking down some cardboard but that’s about it.
Asking $400**SOLD**
Medford Smooth Criminal-
Purchased brand new by me from BladeHQ. This knife features a stonewashed S35VN blade, OD green aluminum scales, and satin finished hardware. I’m not sure if the hardware is Ti or stainless steel. This knife flips extremely well and has an incredibly smooth deployment. It’s been carried a little and there’s a few slight scuffs on the anodizing. This knife has never been disassembled and I’ve only buffed up the edge after some light use. This is a very fidget friendly knife if that’s your thing.
Asking $200**SOLD**
If you want to purchase all the Medfords in a bundle, you can have them all for $800. That’s a $200 discount if purchased separately
Benchmade 810 Contego-
Purchased brand new by me from BladeHQ. This knife features a gray Cerakote blade in M4 steel, black sculpted G10 scales, and stonewashed stainless steel hardware and liners. This knife has been carried and used and there are some light scuffs/smoothing on the coating but they are only noticeable in the right light. The edge has been sharpened but the factory edge angle has not been changed. It has a pretty good action for a coated blade on an Axis lock knife but it’s a little stiff still. Lockup is solid with no play but the centering slightly favors the left side. The knife has been disassembled and cleaned. This knife has been discontinued and is hard to find in a plain edge configuration. Comes with a standard Emerson clip, I do not have the original so it will not be included.
Asking $145 **SOLD**
Last edited:
